2N NetMic Network Microphone Speaker, IP based Microphone (SIP)

Item number: 1989

EAN:

HAN: n/a

Live announcements whenever you need them
The 2N NetMic hardware console, with microphone, enables you to make live announcements or broadcast pre-prepared files to different zones. Its a hardware alternative to the 2N NetSpeaker Console software application that is primarily intended for the public sector, such as schools, courts, railway stations, airports, medical facilities, amusement parks, outdoor swimming pools and sports facilities.

Category: SIP Microphone Console


1.166,20 (980,00 netto)

including19% VAT. , plus shipping

Available now!

Shipping time: 2 - 3 workdays



Live announcements whenever you need them

The 2N NetMic hardware console, with microphone, enables you to make live announcements or broadcast pre-prepared files to different zones. Its a hardware alternative to the 2N NetSpeaker Console software application that is primarily intended for the public sector, such as schools, courts, railway stations, airports, medical facilities, amusement parks, outdoor swimming pools and sports facilities.

Product highlights:

With the 2N NetMic, you will no longer need a computer with pre-installed SW applications for live announcements or to play pre-recorded messages. In addition, thanks to the IP solution, you can connect the console anywhere in the network (not just at the point of the amplifier).

With the help of buttons on the 2N NetMic console, you can easily and quickly select one or more zones for live announcements from the microphone or to play a saved message (e.g. information announcements, commercials, music content, gongs). In addition, if necessary, you can hear what is being played in a given zone by simply pressing a button. Whats more, you can not only connect anywhere in the network, but you wont need a computer with pre-installed SW applications.

The 2N NetMic has one microphone and 14 buttons, and thanks to external connectors you can easily connect an external microphone, CD/MP3 player or headphones with no problem. To control and set up buttons, you can use the 2N NetSpeaker Control Panel application, which can also be used to set up the whole 2N NetSpeaker IP audio system.

Advantages
  • Audio broadcasts to different zones
  • Listening in on audio being played in different zones
  • Option of connecting anywhere in the network (IP solution)
  • Easy and comfortable operation (even without a computer)
  • Simple configuration using the 2N NetSpeaker Control Panel application

Intended for
  • State administration
  • Design firm
  • Large Multinational Corporation
  • System Integrator
  • Operator

Areas of use
  • Schools
  • Courts
  • Bus/train stations and airports
  • Medical facilities
  • Amusement parks, sports facilities, outdoor swimming pools
Specification

Power supply
  • 12 to 32V, max. 1A
  • PoE in accordance with 802.3af standard

Interface

  • Logical inputs:
    Two, galvanically separated, sensitive to contact or charge from 5 to 48V
  • Relay output:
    1, galvanically separated, NO and NC contact, max. load 48V, 1A
  • Earphone output:
    Jack 3.5mm, stereo, power output 2 x 30mW, min. impedance 16Ohm, DR 101dB, THD+N -85dB
  • Main microphone input:
    Symmetrical, XLR, integrated phantom current of 24V, DR 88dB, THD+N -82dB
  • Microphone input for headset:
    Jack 3.5mm, integrated current for electret microphones, DR 84dB, THD+N -78dB
  • Line input:
    Jack 3.5mm, symmetrical mono or non-symmetrical stereo, DR 93dB, THD+N -82dB

Audio stream

  • PCM, 44 100KHz, 16bit, Stereo
  • Speakers
    2 built-in, stereo, power output 2 x 1W

Dimensions

  • 209 x 65 x 143mm

Operating temperature

  • 0 - 40C

Buttons and captions

  • Dimensions of captions
    39.6mm width x 9mm height
  • Large button (speak)
    25.5mm x 12mm
  • Small button (listen)
    12mm x 12mm
Average product review

Write your first review and help others with their purchase decision:

Contact

Please login first to add a tag.