Dinstar UC100-1T1S1O / UC100 All-in-one Box (LTE-Router - data service by GSM/GPRS/EDGE/4G/WCDMA 3G) + FXS/FXO Analog, WAN/LAN-Switch, WLAN VoIP Gateway

Item number: 6314


HAN: UC100-1T1S1O

The LTE device support 2G/3G/4G Data (Internet), not support any voice and VoLTE is only supported with the new UC100-1V1S1O version (Item number: 6787)!

Category: Hybrid (Analog/ISDN/GSM/3G/4G-Data)

199,00 € (167,23 € netto)

including 19% VAT. , plus shipping (Parcel)

Not available now!

UC100 is a multi-functional gateway, which integrates voice service (PSTN and VoIP) and data service (GSM/GPRS/EDGE/LTE 4G/WCDMA 3G). It provides two voice interfaces (including FXS and FXO), offering seamless connectivity to VoIP Network, PLMN and PSTN. Based on SIP, it not only can interacts with VoIP network, but also supports types of GSM/WCDMA/LTE frequency ranges, thus meeting the worldwide requirements about the mobile network. UC100 supports WiFi and has high-speed data-handling capacity, allowing users to enjoy high-speed internet surfing through WiFi or the LAN port.

With VPN transparent transfer function, UC100 is ideally suitable for personal use. Meanwhile, it is perfect for small and micro enterprises, providing high-speed internet access, good voice service and messaging service.

Key Features

  • FXS/FXO/GSM/GPRS/EDGE/WCDMA/LTE interface on a single device
  • Send/receive calls from PSTN/PLMN via FXO/SIP
  • Flexible dial plan, via time, numbers, source IP etc.
  • IVR customization
  • High speed NAT forwarding, support WIFI hotspot
  • Built-in SIP server, support up to 32 SIP Extensions
  • User-friendly web interface, multiple management ways

Physical Interfaces

  • FXSPort: 1
  • FXOPort: 1
  • SIM Slot: 1
  • Ethernet Interfaces
  • 1WAN&3LAN10/100 Base-T RJ45
  • WIFI
  • 2.4GHz 802.11b/g/n,2T2R

Voice Capabilities

  • VoIP Protocols: SIP over UDP/TCP/TLS,SDP,RTP/SRTP
  • Codecs: G.711a/u law,G.723.1, G.729A/B, iLBC,G.726
  • Silence Suppression
  • Comfort Noise Generator(CNG)
  • Voice Activity Detection(VAD)
  • Echo Cancellation: G.168 with up to 128ms
  • Dynamic Jitter Buffer
  • Adjustable Gain Control
  • Automatic Gain Control (AGC)
  • Call Progress Tones: Dial Tone, Ring Back Tone, Busy Tone
  • FAX: T.38and Pass-through
  • DTMF: RFC2833/SIP Info/In-band


  • Connector: RJ11
  • Caller ID: Bellcore Type 1&2, ETSI,BT,NTTand DTMF
  • Answer and Disconnect Signaling: Answer, Disconnect, Busy Tone
  • Polarity Reversal
  • Hook Flash


  • Connector: RJ11
  • Caller ID: FSK, DTMF
  • Polarity Reversal
  • Answer Delay
  • Busy Tone Detection
  • No Current Detection

Mobile Data (Internet)

  • GSM/GPRS/EDGE: 900/1800MHz
  • WCDMA(3G):
  • TD-SCDMA (please ask)
  • EVDO/CDMA2000 (please ask)
  • LTE(4G):
  • TDD-LTE B38/B40/B41
  • FDD-LTE B1/B3/B5/B7/B8/B20
  • SIM/USIM: 1 USIM per Channel
  • SIMCard: 1.8V, 3.0V
  • Antenna: 3.0dB, SMA-Interface

More frequencies please ask, there are different modules for match different country

Supplementary Services

  • Call Forward (Unconditional/No Answer/Busy)
  • Call Waiting
  • Call Hold
  • Call Transfer
  • Hotline
  • Do-not-disturb
  • 3 Way Conference

Software Features

  • Ring Group
  • Routing Groups
  • Caller/Called Number Manipulation
  • Routing Base on Time Period
  • Routing Base on Caller/Called Prefixes
  • Routing Base on Source Trunks
  • Dial Rules
  • Failover Routing
  • FXO Impedance Auto Match
  • IVR Customization
  • Auto Attendant Function
  • CDRs


  • Web GUI Configuration
  • Telnet Management
  • Configuration Restore/Backup
  • Multiple Languages Supported
  • HTTP/TFTP/FTP Firmware Upgrade
  • Auto Provision
  • CDR Report and Export
  • Syslog
  • Ping and Tracert
  • Traffic Statistics: TCP,UDP,RTP
  • Network Capture
  • NTP


  • Power Supply: 12VDC, 1A
  • Power Consumption: 10W
  • Operating Temperature. 0°~ 45°
  • Storage Temperature: -20°~80°
  • Humidity: 10%-90% Non-Condensing
  • Dimensions (W/D/H): 126×75×25mm
  • Unit Weight: 0.7kg

Product Information
UC100 LTE has several variants model to meet the requirements of our customers.

Dinstar UC-Series:

  • UC100-1T1S1O (1 LTE-Data,1 FXS, 1 FXO, WIFI, 1 WAN 3 LAN, Built in SIP Server) - only LTE-Data
    UC100-1T1S1O is a old version and out of stock! Replaced by the new product version Dinstar UC100-1V1S1O with VoLTE support (Item number: 6787)
  • UC100-1V1S1O (1 VoLTE,1 FXS, 1 FXO, WIFI, 1 WAN 3 LAN, Built in SIP Server) - only has VoLTE ( voice and data both, 4G)
  • UC100-1S1O (1 FXS,1 FXO, WIFI,1 WAN 3 LAN, Built-inSIP Server)
  • UC100-1S (1 FXS,WIFI, 1 WAN 3 LAN, Built-in SIP Server)


  • The LTE device support 2G/3G/4G Data (Internet), not support any voice
    The 1V and 1T all is same, just 1V support VoLTE/call  and 1T for data only.
    VoLTE is only supported with the new UC100-1V1S1O version (Item number: 6787)!


Gateway & Interface Features: FXS FXO 4G / LTE Data WiFi VPN OpenVPN T.38 fax relay Echo cancellation
Shipping weight: 0,80 Kg
Average product review

Write your first review and help others with their purchase decision:


Please login first to add a tag.

4G/3G/2G Antenna
2G, 3G & 4G/LTE magnetic antenna (2 Antenna / 3 dBi) with...

2G, 3G & 4G/LTE magnetic antenna (2 Antenna / 3 dBi) with 3m RG174 cable / SMA Male

25,94 € * (21,80 € netto)
Available now!
4G Outdoor Antenna as SET (2 Antenna / 5 dBi) + wallmount...

4G Outdoor Antenna as SET (2 Antenna / 5 dBi) + wallmount angle with 3m cable (RG174)

30,94 € * (26,00 € netto)
Available now!
Dinstar UC100-1V1S1O VoLTE/call + LTE Internet Gateway

Dinstar UC100-1V1S1O VoLTE/call + LTE Internet Gateway

284,17 € * (238,80 € netto)
Available now!