// TSW304 is Teltonika Networks' first unmanaged switch with an integrated, built-in DIN rail mount.
// Equipped with four Gigabit Ethernet ports supporting the IEEE 802.3, IEEE 802.3u, and 802.3az Ethernet standards.
// Designed with easy installation in mind, the TSW304 features a compact size with a shock-resistant casing to go along with its integrated DIN mount.
// 10/100/1000 Mbps Ethernet ports for economical, high-bandwidth solutions to provide reliable data throughput.
// 2-pin industrial power socket and wide range of supported power supply voltages (7-57 VDC and 9-40 VAC).
- Din Rail: Built-in, integrated DIN mounting
- Compact: 102 x 25 x 81.5 mm
- Gigabit Ethernet: 4 x Gigabit Ethernet with speeds of up to 1000 Mbps
- 7-57 Volt: Wide range of supported power supply voltages
- Durability: Rugged aluminum housing
- FROM -40 °C TO 75 °C: A wide operating temperature range
FEATURES
INTERFACES
- Ethernet: 4 x RJ45 ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
IEEE 802.3 is a working group and standards collection created by the Institute of Electrical and Electronics Engineers that defines the media access control of the physical layer and the data link layer for wired Ethernet. IEEE 802.3az standard: Energy-Efficient Ethernet / IEEE 802.3au standard: Isolation requirements for Power over Ethernet (802.3-2005/Cor 1)
PERFORMANCE SPECIFICATIONS
- Bandwidth (Non-blocking): 8 Gbps
- Packet buffer: 128 KB
- MAC address table size: 2K entries
- Jumbo frame support : 9216 bytes
POWER
- Connector: 2-pin power socket
- Input voltage range: 7 - 57 VDC; 9 - 40 VAC
- PoE (passive): Passive PoE input on port No. 1
- Power consumption: Idle 0.26 W / Max 1.44 W
PHYSICAL INTERFACES (PORTS, LEDS)
- Ethernet: 4 x RJ45 ports, 10/100/1000 Mbps
- Status LEDs: 1 x Power LED, 8 x LAN status LED’s
- Power: 1 x 2-pin power socket
- Ground: 1 x Grounding screw
PHYSICAL SPECIFICATION
- Casing material: Aluminum housing
- Dimensions (W x H x D): 102x25x81.5 mm
- Weight: 210 g
- Mounting options: DIN rail mounting
OPERATING ENVIRONMENT
- Operating temperature: -40 C to 75 C
- Operating humidity: 10 % to 90 % non-condensing
- Ingress Protection Rating: IP30
REGULATORY & TYPE APPROVALS
- Regulatory: CE, REACH, RoHS, WEEE
- TSW304: UKCA, FCC, IC, CB, RCM
SAFETY
- Standards: EN IEC 62368-1:2020+A11:2020
IMPORTANT NOTE
Passive PoE
The device may also be powered by an Ethernet cable via the LAN1 port:
(Do not use in other ports!)
The device is NOT COMPLIANT with the IEEE 802.3af-2003 standard: powering the device from an IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.
The device is NOT COMPLIANT with the IEEE 802.3at standard: it cannot power other devices over Ethernet.
Hinweis: Dieses Gerät darf nur vom fachkundigen Elektriker angeschlossen werden!
Vorstellung des Teltonika TSW304 | WebinarMöchten Sie das neue Produkt Teltonika TSW304 kennenlernen? Interessiert an neuen Geschäftsmöglichkeiten und Absatzmärkten? Teltonika stellt Ihnen den TSW304 vor - ein unmanaged Switch mit integrierter Din Rail Befestigungsmöglichkeit.
Teltonika TSW304 - Unkompliziert zu installieren, kinderleicht anzuschließen!
TSW304 ist der erste unmanaged Switch von Teltonika Networks mit einem im Lieferumfang enthaltenen DIN-Schienenhalter
Es gibt noch keine Bewertungen.
