A Capacitance Multiplier is designed to make a small capacitor function like a capacitor that is much, much larger.
This design reduces the output ripple/noise of any PSU to almost negligible levels (less than 5mV up to 1Mhz).
Note this this is not a voltage regulator. The output voltage will track the input voltage (- dropout voltage).
This circuit is very suitable for class A and class D amplifiers or even to feed clean power to your SBCs.
Allo require 5.5X2.5 jack input through small convertor to CM, power required in 19V 5 Amps
Features
- Designed to make a small capacitor function like a capacitor that is much, much larger
- Reduces the output ripple/noise of any PSU to almost negligible levels (less than 5mV up to 1Mhz)
- The output voltage will track the input voltage (- dropout voltage)
- Suitable for class A and class D amplifiers
- Suitable to feed clean power to your SBCs
- Dropout voltage is trim pot selectable
Technical Specifications
Max / Min |
30V IN / MIN 6V IN |
Dropout Voltage |
Trim pot selectable from 0-3V (dropout voltage should always be higher than ripple / noise of PSU) |
Factory Default |
0.5V |
Power Dissipation |
Dropout Voltage x A used = W of heat |
PSRR |
70db |
Suitability |
This circuit is very suitable for class A and class D amplifiers or even to feed clean power to your SBCs |
Board Weight |
|
Versandgewicht: |
0,10 kg
|
Artikelgewicht: |
0,05 kg
|
HAN:
|
CM_Board
|
Herkunftsland:
|
IN
|
TARIC-Code:
|
85437069
|
Angaben zur Produktsicherheit
Herstellerinformationen:
allo.com
Ground Floor #176
Bangalore
Whitefield, Indien, 66
info@allo.com
https://www.allo.com
verantwortliche Person:
VoIPDistri, Mathias Gottensträter
Im Hagen 3
Nordrhein-Westfalen
Halle, Deutschland, 33790
info@voipdistri.com
https://voipdistri.com
Es gibt noch keine Bewertungen.