OpenVox AE1610P40, 16 Port Analog PCI Card + 4 FXS400 modules with EC

Beschreibung
Bewertungen

16 FXS Ports incl. Hardware Echo Cancellation

Product Spotlight
OpenVox AE1610P takes full advantage of Octasic® Hardware Echo Cancellation Module to deliver the superior voice quality on both FXO and FXS interfaces in all 16 ports.

Adjustable Interrupt Routing Design
Interrupts Frequency Adjustment
Up to 16 Simultaneous PSTN Calls (Per PCI Slot)
Compatible with All Commercially Available Motherboards
Octasic® Hardware Echo Cancellation Module Available
3-Month “No Question Asked” Return Policy of OpenVox
OpenVox Lifetime Warranty

Overview

AE1610P is a new generation analog card with Octasic® Hardware Echo Cancellation Module on board. With the interchangeable quad-FXS and quad-FXO modules, AE1610P can eliminate the requirement for separate channel banks or access gateways.

Once the Octasic® DSP module EC2032 is added to the AE1610P, please make sure you are ready to say goodbye to the poor voice quality and echo echo echo in your phone system. No one will even get a chance to hear that any more! The AE1610P with Octasic DSP module will support Telco-grade hardware echo cancellation on all channels, up to the card’s maximum configuration in 16 ports with no additional CPU load.

AE1610P works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.

Target Applications

Channel Bank Replacement / Alternative
Small Office Home Office (SOHO) applications
Small and Medium Business (SMB) applications
Gateway Termination to analog telephones/lines

Services and Features

Caller ID and Call Waiting Caller ID
ADSI Telephones
Loopstart Signaling Support

Technical Specifications

Up to 16 ports through a combination of FXS400 and FXO400 modules
Full-length analog card
Up to 4 quad FXS or FXO modules
RJ45 connector
32-bit 33MHz PCI and fully PCI 2.3 compliant, compatible with all commercially available motherboards,
and proper sharing of PCI interrupts
32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec
Autosense compatibility with 5 V and 3.3 V PCI busses compatible
FPGA design, upgradeable firmware onsite
Power: 7.83W Minimum, 57.03W Maximum at 3.3 V or 5 V.
Operation temperature: 0°C to 50 °C
Storage temperature: -40°C to 125°C
Size: 21.9*11.2*1.8cm
Weight: 142g

Optional Octasic® DSP Echo Cancellation Module — EC2032

1024 taps/128 ms tail/channel (on all channel densities)
Octasic® music protection
Automatic level control (G.169)
Field upgradeable algorithm
V.25 / V.8 answer tone
DTMF as per Q.24
No CPU load as a result of echo cancellation.
Does not increase the physical size of the card, and no additional slot is required
EC2032 (SMEC V1.1) power: 3.83W

Operating Systems