OpenVox IPC110C V2 (1.1Ghz) Embedded Motherboard Intel® Atom® Z510P CPU

Note: The battery is empty and must be replaced. We can replace the battery for you, but you should expect 1-2 weeks delivery time. If we don't hear from you then the board will be delivered without a replacement battery and we assume that you will replace the battery yourself.

HAN: IPC110C_V2

257,04 € (Netto 216,00 € )

inkl. 19% USt. , zzgl.

Sofort verfügbar
Lieferzeit: 2 - 3 Werktage (DE - Ausland abweichend)

Beschreibung
Bewertungen

Product Spotlight
IPC110 is a new version embedded asterisk® motherboard and works with PCIe cards to provide FXO/FXS, BRI and/or PRI interfaces with the connection of Mini PCIe to PCIe raiser cards.

Fanless design
Intel® Atom® Z510P CPU up to 1.1GHz
Embedded asterisk® motherboard
IPC110C V2 it's install with new larger capacity batteries instead V1

Overview
OpenVox IPC110 motherboards are small form (15cm*15cm) factor system boards optimized for IPPBX and network security applications. The Fanless design, as low as 6W normal power, enables more reliability to the system and ability to operate in harsh industrial environments. Integrated up to 3 Ethernet ports, the IPC110 motherboards provide a flexible choice for different applications to the users.

With OpenVox PCIe cards, SMB can easily have their phone systems built with IPC110. Installed one OpenVox DE230E card with IPC110, users can have up to 60 simultaneous voice calls through two E1 ports or 100 concurrent calls in one single system.

IPC110 works with Asterisk®, Askozia®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™, pfSense and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Firewall, Switch, IVR, and VoIP gateway applications.

Main Features:

Powerful Intel Atom Z510P Processor up to 1.1GHz
512 KB L2 cache ,24K data ,32K instruction
Up to 3 Ethernet channels
Up to 2 Mini PCIe sockets for voice cards and other expansion
Up to 2GB DDR2 SDRAM, 64 bit wide for high memory bandwidth
8 Mbit flash for AMI BIOS
Flexible combinations of data storage solution:CompactFlash + 44 pin IDE header + SATA connector(only available at DC12V power in) for user’s operating system and application
Wide voltage range :7 to 20V (absolute) DC supply through DC jack
1 serial port (DB9 male) for debug usage
Header for LPC bus (use for flash recovery or I/O expansion)
Low EMI Emission level and high Electro Magnetic Susceptibility

Technical Specifications

CPU: Intel Atom Z510P 1.1GHz
DRAM: Slot Onboard, up to 2GB DDR2 400/533 SDRAM (double side 1GB)
Chipset: Intel Poulsbo
SouthBridge: Poulsbo integrated
Storage: Compact Flash socket,44pin PATA connector 1 SATA slot (only available at Power in DC12V)
Power: DC jack, 7V to 20V, Suggest 12V supply, Center pin =positive, sleeve = ground, 2.1 mm diameter.
Three front panel LEDs, for 3 programmable GPO status indicator
Push button: for mode setting switch, accessing a programmable GPI, active low means switch is pressed
Expansion: 2 Mini PCIe slot, fixed and individual interrupt (under Centos5.3 5.4)
Connectivity: Up to 3 Ethernet channels (1000Mbps speed) 3 PCIe Ethernet controller
Fixed and individual interrupt (under Centos5.3 5.4)
Support PXE (for remote boot )
I/O: 1*DB9 serial port, for debug console usage, RS232
2*USB 2.0 port
Board size: 6 x 6" (152.4 x 152.4 mm)
Temperature: 0°C to 60°C (contact factory for more temp. options)
Firmware: AMI BIOS
PCB layer: 8
Power dissipation: ~6W
(Condition: 1GB memory, unattached HDD, unattached Mini PCIe card , Attached 4GB CF card, under windows XP.)