Planet VC-231G 1-Port 10/100/1000T Ethernet over VDSL2 Konverter 30a

150/150Mbps Downstream/Upstream, High Performance Gigabit Ethernet over Phone Wire Solution
PLANET VC-231G, a new-generation and high-performance Gigabit Ethernet-over-VDSL2 Converter, works well with a pervasive telephone line network with a symmetric data rate of up to 150/150Mbps (G.INP, Sym, 8dB) over a distance of 300m and 22/10Mbps over a long distance of 1.4km. It is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely the fastest data transmission speed over the existing copper telephone lines without the need of rewiring.

High-performance Ethernet over VDSL2
Via the latest VDSL2 technology, PLANET VC-231G offers high-speed access to Internet, up to 190Mbps for both upstream and downstream data transmissions. With integrated support for the ITU-T’s new G.993.5 vectoring technology, the VC-231G works in conjunction with vectoring-enabled DSLAMs to remove crosstalk interference and improve maximum line bandwidth across the existing copper infrastructure.

Implementing with Existing Telephone Copper Wires
The VC-231G is also a Long Reach Ethernet (LRE) converter providing one RJ45 Ethernet port and one RJ11 phone jack, which is for VDSL2 connection. Use the additional splitter from the package of the VC-231G to share the existing phone line with POTS, thus replacing the existing copper wiring is not necessary. Just plug the VC-231G with the additional splitter into the existing RJ11 telephone jack and a high-performance VDSL2 network can be connected. It is ideal for use as an Ethernet extender to an existing Ethernet network.

Delivering High-demanding Service Connectivity for ISP/Triple Play Devices
The VC-231G provides an excellent bandwidth demand for the triple play devices for home entertainment and communication. With the asymmetric data transmission of 190/100Mbps (G.INP, Asym, 8dB), the VC-231G enables many multi-media services to work on the local Internet, such as VoD (video on demand), voice over IP, video phone, IPTV, Internet caching server, distance education, and so on.

Easy and Flexible Installation
The Ethernet-over-VDSL2 converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231G offers two modes, CPE and CO, for application -- CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231G and a CO mode VC-231G must be set up as one pair of converters to perform the connection.

ADSL2+ Fallback
For those ISPs that still provide ADSL broadband service, the VC-231G can support transmission rates up to 24Mbps downstream and 1Mbps upstream with the ADSL2+ technology. The VC-231G establishes a connection with ISP and can be also directly switched over to VDSL2 after the ISP network upgrade.

Key Features

ITU-T G.993.5 G.vectoring and G.INP
DMT-based coding technology
Additional splitter to share voice and data
CO/CPE mode selectable via DIP switch
Selectable target band plan and SNR margin
Up to 150/150Mbps bandwidth (in G.INP, Sym, 8dB mode)
1x 10/100/1000BASE-TX LAN ports
Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u, 100BASE-TX and IEEE 802.3x, flow control Ethernet standards
Half duplex back pressure and IEEE 802.3x full duplex pause frame flow control
One RJ11 connector for VDSL port with VDSL connection
Voice and data communication can be shared simultaneously based on the existing telephone wire
Supports IEEE 802.1Q VLAN tag transparency
VDSL2 standalone transceiver for simple bridge modem application
Advantage of minimum installation time (Simply by Plug-and-Play)
Supports extensive LED indicators for network diagnosis
Co-work with PLANET media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48)
Compact in size and easy to install

Hardware Specifications

LAN Ports 1 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
VDSL Port 1 VDSL2 RJ11 female phone jack
Twisted-pair telephone wires (AWG-24 or better) up to 1.4km
Phone Port Additional splitter for POTS connection
Dimensions (W x D x H) 97 x 70 x 26 mm
Weight 184g
Power Requirements DC 5V, 2A external power
LED Indicators 1 power: Green
1 1000BASE-T LNK/ACT: Green
1 100BASE-TX LNK/ACK: Green
1 VDSL:Green
1 CO: Green
1 CPE: Green
Housing Metal
DIP Switch & Functionality 4-position DIP switch
CO or CPE mode selectable
Selectable G.INP and interleaved mode
Selectable target Band plan
Selectable target SNR mode

Switch Specifications

Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Flow Control Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Maximum Packet Size 1522bytes

System Specifications

VDSL Compliance VDSL-DMT:

ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T G.993.2 VDSL2 (Profile 17a/30a support)
ITU-T G.993.5 G.vectoring
ITU-T G.998
G.INP

ADSL Compliance Capable of ADSL2/2+ standard:

ITU G.992.3 G.dmt.bis

ITU G.992.5 G.dmt.bisplus

Data Rate: Up to 24Mbp

Performance*(Downstream/Upstream)

CO, Interleave, Asym, 8dB

200M -> 190Mbps/87Mbps
400M -> 161Mbps/60Mbps
600M -> 118Mbps/36Mbps
800M -> 59Mbps/24Mbps
1000M -> 47Mbps/7Mbps
1200M -> 39Mbps/4Mbps
1400M -> 25Mbps/4Mbps

CO, Interleave, Sym, 8dB

200M -> 147Mbps/139Mbps
400M -> 112Mbps/110Mbps
600M -> 75Mbps/73Mbps
800M -> 44Mbps/44Mbps
1000M -> 26Mbps/25Mbps
1200M -> 24Mbps/13Mbps
1400M -> 20Mbps/9Mbps

G.INP, ASym, 8dB

200M -> 197Mbps/101Mbps
400M -> 168Mbps/65Mbps
600M -> 109Mbps/34Mbps
800M -> 65Mbps/20Mbps
1000M -> 53Mbps/7Mbps
1200M -> 44Mbps/4Mbps
1400M -> 28Mbps/4Mbps

G.INP, sym, 8dB

200M -> 150Mbps/150Mbps
400M -> 117Mbps/117Mbps
600M -> 77Mbps/77Mbps
800M -> 43Mbps/43Mbps
1000M -> 29Mbps/28Mbps
1200M -> 27Mbps/15Mbps
1400M -> 22Mbps/10Mbps

CO, Interleave, Asym, 12dB

200M -> 178Mbps/84Mbps
400M -> 143Mbps/53Mbps
600M -> 99Mbps/32Mbps
800M -> 48Mbps/22Mbps
1000M -> 41Mbps/5Mbps
1200M -> 33Mbps/3Mbps
1400M -> 23Mbps/3Mbps

CO, Interleave, Sym, 12dB

200M -> 135Mbps/127Mbps
400M -> 96Mbps/96Mbps
600M -> 61Mbps/59Mbps
800M -> 40Mbps/40Mbps
1000M -> 23Mbps/18Mbps
1200M -> 22Mbps/9Mbps
1400M -> 16Mbps/7Mbps

G.INP, Asym, 12dB

200M -> 185Mbps/89Mbps
400M -> 148Mbps/54Mbps
600M -> 95Mbps/32Mbps
800M -> 58Mbps/14Mbps
1000M -> 46Mbps/6Mbps
1200M -> 37Mbps/3Mbps
1400M -> 25Mbps/3Mbps

G.INP, Sym, 12dB

200M -> 140Mbps/140Mbps
400M -> 97Mbps/97Mbps
600M -> 60Mbps/60Mbps
800M -> 35Mbps/35Mbps
1000M -> 26Mbps/21Mbps
1200M -> 25Mbps/11Mbps
1400M -> 18Mbps/8Mbps

Standards Conformance
Standards Compliance IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-duplex flow control
IEEE 802.1p Class of Service
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T G.993.2 VDSL2 (Profile 17a/30a support)
ITU-T G.993.5 G.Vectoring & G.INP
ITU-T G.998

Artikelnummer:	2989
GTIN:	4711605282826
Kategorie:	ADSL/VDSL / 2-Draht
Hersteller:
Versandgewicht:	0,65 kg
Artikelgewicht:	0,55 kg
HAN:	VC-231G

Es gibt noch keine Bewertungen.

Kunden kauften dazu folgende Artikel:

Sale 43%

TP-Link TL-WR841N 300Mbit/s-WLAN-Router

Planet VC-231G 1-Port 10/100/1000T Ethernet over VDSL2 Konverter 30a Profil mit G.vectoring, RJ11

Bitte beantworten Sie die Frage

Bitte beantworten Sie die Frage