Teltonika TRB143 ist ein kompaktes industrielles 4G (LTE) Gateway, mit M-Bus Schnittstelle, Gigabit Ethernet Port, Micro-USB, einer leistungsstarken CPU und RutOS Software für erweiterte Netzwerkanwendungen.
Standard Paket enthält
- Teltonika TRB143
- 18 Watt EU Netzteil
- 1x LTE-Antenne (Magnethalterung, SMA-Stecker, 3 m Kabel)
- 1x Inbusschlüssel
- 1x LAN-Kabel
- QSG (Schnellstartanleitung)
- Verpackungsbox
FEATURES
MOBILE
- Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
- Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID.
- SMS/Call SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities
- USSD Supports sending and reading Unstructured Supplementary Service Data messages
- Black/White list Operator black/white list
- Band management Band lock, Used band status display
- APN Auto APN
- Bridge Direct connection (bridge) between mobile ISP and device on LAN
- Passthrough Gateway assigns its mobile WAN IP address to another device on LAN
- Multiple PDN Possibility to use different PDNs for multiple network access and services (optional)
ETHERNET
- LAN 1 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX crossover
NETWORK
- Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL)
- Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
- Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
- Firewall Port forwards, traffic rules, custom rules
- DHCP Static and dynamic IP allocation
- QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port
- DDNS Supported >25 service providers, others can be configured manually
- SSHFS Possibility to mount remote file system via SSH protocol
SECURITY
- Authentication Pre-shared key, digital certificates, X.509 certificates
- Firewall Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
- Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
- Mobile quota control Set up custom data limits for SIM card
- WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
- Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
- OpenVPN Multiple clients and a server can run simultaneously, 12 encryption methods
- OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
- GRE GRE tunnel
- IPsec IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
- PPTP, L2TP Client/Server services can run simultaneously, L2TPv3 support
- SSTP SSTP client instance support
- Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
- DMVPN Method of building scalable IPsec VPNs
- WireGuard WireGuard VPN client and server support
- ZeroTier ZeroTier VPN
M-BUS
- M-Bus Interface The M-Bus interface can support up to 250 slave devices and can power up to 6 slave devices.
MODBUS
MODBUS TCP SLAVE
- ID filtering Respond to one ID in range [1;255] or any
- Allow remote access Allow access through WAN
- Custom registers MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality
- MODBUS TCP MASTER
- Supported functions 01, 02, 03, 04, 05, 06, 15, 16
- Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT GATEWAY
- Gateway Allows sending commands and receiving data from MODBUS Master through the MQTT broker
DATA TO SERVER
- Protocol HTTP(S), MQTT, Azure MQTT, Kinesis
MONITORING & MANAGEMENT
- WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log
- FOTA Firmware update from sever, automatic notification
- SSH SSH (v1, v2)
- SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
- Call Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer
- TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
- MQTT MQTT Broker, MQTT publisher
- SNMP SNMP (v1, v2, v3), SNMP trap
- JSON-RPC Management API over HTTP/HTTPS
- Modbus Modbus TCP status/control
- RMS Teltonika Remote Management System (RMS)
IoT PLATFORMS
- Cloud of Things Allows monitoring of: Device data, Mobile data, Network info, Availability
- ThingWorx Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
- Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
- Azure IoT Hub Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
SYSTEM CHARACTERISTICS
- CPU ARM Cortex-A7 1.3 GHz CPU
- RAM 256 MB (160 MB available for userspace)
- FLASH storage 512 MB (200 MB available for userspace)
FIRMWARE / CONFIGURATION
- WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
- FOTA Update FW
- RMS Update FW/configuration for multiple devices
- Keep settings Update FW without losing current configuration
FIRMWARE CUSTOMIZATION
- Operating system RutOS (OpenWrt based Linux OS)
- Supported languages Busybox shell, Lua, C, C++
- Development tools SDK package with build environment provided
INPUT/OUTPUT
- Configurable I/O 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
- Output control HTTP POST/GET, Schedule
- Events SMS, EMAIL
- I/O juggler Allows to set certain I/O conditions to initiate event
POWER
- Connector 4-pin industrial DC power socket
- Input voltage range 12 – 30 VDC (4-pin industrial socket), reverse polarity protection, surge protection >33 VDC 10us max
- Power consumption Idle: 3 W, Max: 6 W
PHYSICAL INTERFACES (PORTS, LEDS, ANNTENAS, BUTTONS, SIM)
- Ethernet 1 x RJ45 port, 10/100/1000 Mbps
- M-Bus 1 x M-Bus Interface
- I/Os 2 x Configurable I/O pins on 4-pin power connector
- Status LEDs 3 x connection type status LEDs, 3 x connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
- SIM 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
- Power 1 x 4-pin DC power connector
- Anntena 1 x SMA female for LTE
- Reset Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATIONS
- Casing material Aluminum housing
- Dimensions (W x H x D) 74.5 x 25 x 73 mm
- Weight 145g
- Mounting options DIN rail, wall mounting (additional kits needed), flat surface placement
OPERATING ENVIRONMENT
- Operating temperature -40 °C to 75 °C
- Operating humidity 10 % to 90 % non-condensing
- Ingress Protection Rating IP30
CERTIFICATION & APPROVALS
- Regulatory CB, CE, UKCA, RoHS, REACH, WEEE
SAFETY
- Standards IEC 62368-1:2018
Angaben zur Produktsicherheit
Herstellerinformationen:
Teltonika Networks
K. Baršausko st. 66
Kaunas
Kaunas, Litauen, 51436
info@teltonika-networks.com
https://teltonika-networks.com
Es gibt noch keine Bewertungen.
