Yeastar TDM400 PCI Card

Fully-supported Zaptel Compatible Hardware

The Yeastar TDM400 is a PCI 2.2 card that supports FXS and FXO station interfaces for connecting analog telephones and analog POTS lines through a PC. It supports a combination of S2 or O2 modules for a total of 4 lines. Using Yeastar’s TDM400 hardware, Open Source Asterisk PBX software, and a standard PC, users can create a Small Office Home Office (SOHO) telephony environment that includes all the sophisticated features of a high-end PBX/Voicemail platform. TDM400 is more specially designed to support Windows.
The modules are interchangeable to create various combinations of interfaces.

S2 Module(2 FXS Ports):
The S2 is a module with 2 FXS ports to terminate two analog telephone.

O2 Module(2 FXO Ports):
The O2 is a module with 2 FXO ports to terminate two analog PSTN(POTS) lines.

Why choose TDM400
TDM400 is designed to fully support Zaptel compatible hardware. You need only to add the corresponding Driver Module on Asterisk Software, and no need to change any code of Asterisk.

Much better than TDM400P in quality & stability, and save almost 50% money.
100% compatible with Asterisk, and run as good as TDM400P.
Timely technical support and services are available, 3 years warranty.
Intuitive LED, Red light for FXO port and Green light for FXS port.
Mini Version of TDM800. It's quality is on a par with that of TDM800, and shorter than half-length.
Easy to install, no training required

Target Applications
Gateway Termination to Analog Telephones and analog POTS lines

Standard Package
TDM400 mother card
(Length: 121mm)
Up to 2 daughter modules; 2 line cables and 1 power cable
*60mm
TDM400 Instruction Size: 255mm*160mm
Weight: 0.30kg

Interface Standard
PCI 2.2 with 3.3- or 5-volt power
4P hard disk power supply with 12-volt
FXS relevant RJ11 port supply DC Feed -48V and loop current 20mA Two color LED: Red light for FXO port
and Green light for FXS port

Environment Conditions
Operation Range: 0°to 50°C, 32° to 122° F
Storage Range: -20° to 65°C, 4° to 149° F
Humidity: 10-90% non-condensing

Hardware Requirements
500-Mhz Pentium III or better with
64MB RAM
Available PCI Slot

TDM400 Analog Interface Card
	Datasheet TDM400
	Compare with TDM400P
	Hardware Installation

Artikelnummer:	1154
Kategorie:	Interface & Gateway
Hersteller:
Artikelgewicht:	0,50 kg
HAN:	TDM400p

Es gibt noch keine Bewertungen.

Yeastar TDM400 PCI Card

Bitte beantworten Sie die Frage

Bitte beantworten Sie die Frage