Phone Features
- Polyphonic MIDI Ring / Vibration ringer
- Simultaneous bell and vibration effects
- Hotkey for vibration and ring toggling
- Adjustable ringing and volume levels
- Adjustable display brightness and timeout
- 100 call history of inbound, outbound and missed call
- 500 phone book with 30 grouping
- 99 speed dial
- Phone book search and during call
- Phonebook file synchronization via Auto Provisioning Server
- Last number redial
- Support to setup hotkey
- Call time
- Time and date
- Volume control
- MWI
- Alarm/Wakeup call
- World time (52 countries)
- Location (52 countries)
- Call progress tones (19 countries)
- Calculator
- Phone Menu Language:
English, Francais, Deutsch, Greece, Espanol, Nederland, Polish, Portuguese, Italiano, Turkish - PC-Sync
- Ear phone
- Speaker phone
- Call mute
- Call hold
- Call transfer(attended/unattended/consultation)
- Call waiting
- Call forwarding(busy/no answer/unconditional)
- Caller ID
- Caller ID blocking
- 3 way conference (dependant on SIP Proxy)-Optional
- Auto provisioning
Automatic boot-up provisioning
-Automatically routed to Auto provisioning server address from DHCP Bootup option 66
-ini (general.ini for common/ mac.ini for respective)
Proxy, Account / System setting (language, time, location)/ Basic call Latest version firmware upgrade
- Manual Firmware upgrade
- Web Configuration Tool
- Administrator policy
- PC-SYNC
- SYSLOG
- SNTP Time Synchronization
- Diagnosis
Wireless LAN
WLAN Profile
- Support 4 Non-volatile profiles
1 volatile modifiable profile
- Profile condition setup
Security
-Network : DHCP/Static IP
- WEP 64bits / 128 bits
- WPA-PSK / WPA-EAP (WPA and WPA2)
- 802.1x (EAP-MD5, EAP-TTLS, PEAP, EAP-TLS)
Roaming
- Auto site scan
- L2/L3 quick roaming by admin setting conditions
- Signal level roaming
Voice over IP
- Audio Codec
- Communication Protocol
SIP Proxy Redundancy (1st Proxy, 2nd Proxy)
- Jitter Buffer
- DTMF(Inbound/ RFC2833/ SIP INFO)
- RTP/RTCP
HARDWARE SPECIFICATION
WIRELESS
IEEE 802.11a/b/g/n supported
Frequency band: 2.400~2.497GHz
5.745~5.825GHz
CH149, CH153, CH157, CH161
RX sensitivity: -95dBm@ 1Mbps
DISPLAY
262K TFT color LCD
320 x 240 pixels
Size 2.4 inch
POWER SUPPLY
Power supply input: 100~240 Vac, 50/60Hz
Power supply output: 5Vdc, 2A
Battery: Li-ion 1100mAh
HANDSET KEYS
Send, End, Cancel, 5-way navigation key,
4 soft keys, Number keypad(0 ~ 9, *, #)
DIMENSIONS (H x W x D)
5.9x 1.96 x 0.59 in./15.0 x 5.0 x 1.5cm
Weight: 3.80oz/108g (with Battery)
3.03oz/86g (without Battery)
TEMPERATURE RANGE
Operation: 32~122 ?/ 0~50 ?
Relative humidity: 10%~85%
PACKAGE CONTENTS
Handset, Battery pack, Cradle, Power supply,
AC cable, Quick start guide
Versandgewicht: | 0,80 Kg |
Artikelgewicht: | 0,60 Kg |
Durchschnittliche Artikelbewertung
Anleitung zur Firmware-Aktualisierung über USB
Incom (ex. UniData) ICW-1000G Datenblatt
Incom ICW-1000 Produktkatalog
Firmware version 1.1.3. Release Notes
Admin Handbuch für ICW-1000G
Benutzerhandbuch für ICW-1000G
USB-Firmware-Upgrade Anleitung für Incom WLAN Telefon
INCOM ICW-1000G Admin's Upgrade Manual
Firmware version 1.1.7. Release Notes
Ein kritisches Problem wurde bei der ICW-1000G Software gefunden, die das richtige Datum 2020 nicht korrekt anzeigt. Wir haben bemerkt, dass dieses Problem bei allen erschienen ICW-1000G auftritt. Sie können neue Firmware herunterladen, um das Problem zu korrigieren.

Firmware version 1.1.3. Released
ICW-1000G Configuration Encryption Tool (Linux)
MFG-Tools
This procedure can be used when the auto or the manual (via the phone or the web interface) upgrade is not working properly.
- Download the MFG-Tools.zip file
- Download the instruction oh how to configure MFG Tool included in Method_of_upgrade_of_ICW-1000G_via_USB_ports_eng.pdf
- Please make sure the phone is turned off. However, battery should be kept in.
- Unzip the *MFG-Tools.zip* in the directory of your choice.
- Open the upgrading MFG tool by launching the file *FmgTool.exe* (This file is located in the directory where you have extracted the MFG-Tools.zip)
- Connect USB cable to the phone pressing menu key.
- Check that INCOM logo blink/disappear when connecting the USB cable to the Computer.
- Release the menu key.
- Please go into options and USB port at tool and find "HID compliant vendor-defined device" and click them.
- Please press OK on tool and then you're able to find "HID compliant vendor-defined device" at main display on tool.
- Please press "Start" on tool.
- Upgrading will be proceeded.
- After upgrading, please unplug the cable and take out the battery.
- Your phone will be upgraded.
Firmware version 1.1.7. Released
Ein kritisches Problem wurde bei der ICW-1000G Software gefunden, die das richtige Datum 2020 nicht korrekt anzeigt. Wir haben bemerkt, dass dieses Problem bei allen erschienen ICW-1000G auftritt. Sie können neue Firmware herunterladen, um das Problem zu korrigieren.
Weitere Informationen finden Sie im PDF (Firmware version 1.1.7. Release Notes) und Firmware Update Beschreibung (INCOM ICW-1000G Admin's Upgrade Manual)