Teltonika TRB256 450 MHz Smart Meter Gateway

Teltonika TRB256 450 MHz Smart Meter Gateway

Teltonika TRB256 ist ein Smart Metering Gateway für den Energiesektor "450Mhz connect" und wird als Schlüsselelement der Digitalisierung der Energiewende technische Geräte über LTE und LTE-M im extrem hochverfügbaren 450 MHz-Mobilfunknetz messen, steuern und regeln.

Das Teltonika TRB256 Smart-Meter-Gateway kann eine oder mehrere moderne Messeinrichtungen und andere technische Geräte ( z.B. Erneuerbare-Stromerzeugungsanlagen, Gas-Messeinrichtungen, Wärmepumpen) sicher in ein Kommunikationsnetz einbinden.

130,90 € (Netto 110,00 €)

inkl. 19% USt. , zzgl. (Parcel)

Sofort verfügbar
Lieferzeit: 182 - 183 Werktage (Ausland)

Teltonika TRB256 ist ein kompaktes industrielles LTE Cat M1/NB IoT-Gateway, das mit einem Ethernet-Port, einem Anschlussbereich mit Steckverbindern für I/O, RS232, RS485, GPS und RutOS-Software für erweiterte Netzwerklösungen ausgestattet ist.

Industrielles NB-IoT-Gateway
Das TRB256 ist ein industrielles 4G LTE NB-IoT-Gateway, das für eine breite Palette von IoT-Lösungen entwickelt wurde. Das Gerät ist mit mehreren WAN-Schnittstellen wie z.B. I/O, RS232, RS485 und einem Ethernet-Port ausgestattet und verfügt zudem über eine Dual-SIM-Funktionalität für unterbrechungsfreie Konnektivität. Dieses industrietaugliche Gateway unterstützt auch das 450-MHz-Frequenzband, das im Vergleich zu Standardfrequenzen eine bessere Abdeckung mit dem LTE-Netz bietet, und ist somit eine ideale Lösung für verschiedene M2M-Anwendungen.

Specification

Mobile

Mobile module: LTE Cat M1 /Cat NB1, NB2 / EGPRS (simultaneous operation of cellular and GNSS connectivity is not supported)
SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, on roaming, no network, network denied, data connection fail
Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
Black/White list: Operator black/white list
Band Management: Band lock, Used band status display
SIM idle protection Service: When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then
APN: Auto APN
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
Passthrough: Gateway assigns its mobile WAN IP address to another device on LAN

Ethernet

Ethernet: 1 x ETH port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Network

Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall: Port forward, traffic rules, custom rules
Firewall status page: View all your Firewall statistics, rules, and rule counters
Ports Management: View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
Network topology: Visual representation of your network, showing which devices are connected to which other devices
Hotspot: Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes
DHCP: Static and dynamic IP allocation, DHCP Relay
QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS: Supported >25 service providers, others can be configured manually
Network backup: VRRP, Wired options, each of which can be used as an automatic Failover, Mobile
SSHFS: Possibility to mount remote file system via SSH protocol

Security

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN: Tag-based VLAN separation
Mobile quota Control: Mobile data limit, customizable period, start time, warning limit, phone number
WEB filter: Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access Control: Flexible access control of SSH, Web interface, CLI and Telnet

VPN

OpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methods
OpenVPN Encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN: Method of building scalable IPsec VPNs
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: WireGuard VPN client and server support
Tinc: Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.

BACNET

Supported modes: Router
Supported connection types: RS485, TCP

OPC UA

Supported modes: Client, Server
Supported connection types: TCP

MODBUS

Supported modes: Server, Client
Supported connection types: RS232, RS485, TCP
Custom Registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
Supported data Formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Data to Server

Protocol: HTTP(S), MQTT, Azure MQTT, Kinesis
Data to Server: Extract parameters from multiple sources and different protocols, and send them all to a single server

Modbus MQTT Gateway

Modbus MQTT Gateway: Allows sending commands and receiving data from MODBUS Master through MQTT broker

DNP3

Supported modes: Station, Outstation
Supported connection types: RS232, RS485, TCP

DLMS

DLMS Support: DLMS - standard protocol for utility meter data exchange. Support trough serial and TCP

Monitoring & Management

WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call: Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap
JSON-RPC: Management API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

IoT Platforms

Cloud of Things: Allows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorx: Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity: Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
Azure IoT Hub: Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

System Characteristics

CPU: Mediatek, 580 MHz, MIPS 24KEc
RAM: 128 MB
FLASH storage: 16 MB

Firmware / Configuration

WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
FOTA: Update FW
RMS: Update FW/configuration for multiple devices at once
Keep Settings: Update FW without losing current configuration

Firmware Customisation

Operating System: RutOS (OpenWrt based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development Tools: SDK package with build environment provided
GPL customization: You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs.

Location Tracking

GNSS: GPS, GLONASS, BeiDou, Galileo, and QZSS (simultaneous operation of GNSS and cellular connectivity is not supported)
Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA: NMEA 0183
NTRIP: NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
Server Software: Supported server software TAVL, RMS
Geofencing: Configurable multiple geofence zones

Serial

RS232: Terminal block connector: TX, RX, RTS, CTS
RS485: Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface)
Serial functions: Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client

Input / Output

Input: 3 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
Output: 3 x Digital Output, Open collector output, max output 30 V, 300 mA
Events: Email, RMS, SMS
I/O juggler: Allows to set certain I/O conditions to initiate event

Power

Connector: 2-pin in 16-pin industrial terminal block
Input voltage range: 9 – 30 VDC, reverse polarity protection, surge protection +/-1 kV 50 µs max
Power consumption: Idle: <2 W, Max: <3.5 W

Physical Interfaces

Ethernet: 1 x RJ45 port, 10/100 Mbps
I/O’s: 3 x Configurable digital I/O in 16-pin terminal block
Status LEDs: 3 x connection status LEDs, 3 x connection strength LEDs, 1 x power LED, 1 x Eth port status LED
SIM: 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, double stacked SIM tray
Power: 1 x 16-pin terminal block
Antennas: 1 x SMA connector for LTE, 1 x SMA connector for GNSS
RS232: 4-pin in 16-pin terminal block (TX, RX, RTS, CTS)
RS485: 4-pin in 16-pin terminal block (D+, D-, R+, R-)
Reset: Reboot/User default reset/Factory reset button

Physical Specification

Casing material: Aluminium housing
Dimensions (W x H x D): 83 x 25 x 74.2 mm
Weight: 165 g
Mounting Options: DIN rail, flat surface placement

Operating Environment

Operating temperature: -40 °C to 75 °C
Operating humidity: 10% to 90% non-condensing
Ingress Protection Rating: IP30

Regulatory & Type Approvals

Regulatory: CE, UKCA, EAC, CB

Artikelnummer:	0256
Kategorie:	5G & 4G/LTE Internet
Hersteller:
Betriebstemperatur:	-40℃ ~ 75℃ (-40℉~167℉)
Funktechnik:	4G (LTE Cat M1) 4G (LTE Cat NB2)
Region (Netzbetreiber):	Global
Versandgewicht:	0,40 kg
Artikelgewicht:	0,30 kg
HAN:	TRB256
Herkunftsland:	LT
TARIC-Code:	85176200