ALLO BLOX eSBC Session Border Controller Built to Protect & Manage between IP Network Borders (Security Devices)

ALLO BLOX eSBC Session Border Controller Built to Protect & Manage between IP Network Borders (Security Devices)

Security needs for home/soho users

SKU	2509
Category	Security
Manufacturers

451,01 € (Net 379,00 €)

incl. 19% VAT , plus

Please note the permissible order quantity of 1 Units.

Available immediately
Delivery time: 9 - 10 Workdays (DE - int. shipments may differ)

Every year the number of PBX fraud victims increases dramatically. More and more companies are targeted by individuals who are looking to bring down or exploit the communications system. Some do it for fun and others for illicit profit, but the end result is always the same… Huge bills and down time.

The most vulnerable targets remain small-medium size businesses that are new to managing their own IP PBX system. They either don’t have the IT experience and staff to properly secure and maintain the network, or they’re unaware of the risks altogether having recently switched from a landline system. Whatever the reason, many networks are consistently left unprotected. By the time most companies realize that something is wrong with their phone expenses, it’s too late - the network security has been compromised.

Who Needs an SBC?

If you are deploying an IP PBX system connected to the internet, chances are that it will get hacked within 5h-6h by hackers looking to make calls at your expense or to bring your communication network down just because they can.

VoIP became a favorite target for hackers as its popularity and uptake increased in the past years
Firewalls are just unable to block hackers who use scripts and bots to access PBX systems
The Source address of the hacker is being deliberately spoofed, making it more difficult to detect even more when this one is also masked by the “noise” of many randomly generated addresses
A common and devastating attack is the DoS (Denial of Service). PBX systems are unable to handle the flood of SIP requests generated by the hackers. These thousands of simultaneous requests brings your PBX down
Brute force password guessing can have the same impact as a DoS attack

And these are only a few attacks out of the thousands used by hackers worldwide. Would you leave our home unlocked? So then why leave your PBX open? Most hackers today, are after the money; so they commit what is known as toll fraud. They access your PBX and use your accounts to place long distance calls or other chargeable calls.

BLOX eSBC Session Border Controller Built to Protect & Manage between IP Network Borders

Blox eSBC is Session Border Controller up to 100 simultaneous Channels.
Blox eSBC will secure your internal PBX/Gateway VolP Network from external network/internet
Blox eSBC handles SIP-NAT issues observed in common VolP deployments
Blox eSBC conducts DPI Packet Inspection of SIP traffic, supporting the Signatures for Key Malwares vulnerabilities observed in SIP Deployments
Blox eSBC supports SIP-TLS, Topology Hiding, CAC, Media Pin-holing, Media
Encryption (SRTP), Transcoding, Hosted PBX, Domain routing

BLOX Basic Functions

SIP Outbound/Inbound Trunk and domain policies to route the calls
Secure Remote access to Internal SIP PBX
Eliminates bad VolP signaling and media protocol at the network boundary
Built-in firewall which can controls IP Addresses/Port based Filtering, DOS/DDOS Attacks, IP Blacklist & NAT. It opens pinhole in the firewall to allow VolP signaling and media to pass through
Media bridging, which may include Voice over IP and Fax over IP
Least Call Routing Re-Direct
DTMF Support for RFC2833/INBAND/SIP INFO

BLOX Main Features Advanced Features

SIP Trunking (Connectivity)
Remote Worker (Roaming User)
SIP Registration Pass-thru
Core Session Router (Call Routing)
SIP Intrusion Prevention
DDoS / DoS Attack Protection
SIP Registration Scan Attack Detection
SIP Header Normalization
SIP Malformed Packet Protection
Topology Hiding
Call Access Control (Total calls per Trunk, Inbound/Outbound)
Least Cost Routing
Media anchoring
Call Security with TLS
Advanced NAT Traversal Capabilities
T.38 Fax Relay
CDR record generation
SIP Header Manipulation
RTCP Statistics
IP Firewall
VLAN and Virtual IP support
IPSec Encryption
Packet-to-packet call flows (B2B UA)
Media relay with dynamic pinhole control
SIP Request Rate Limiting
Hardware-based Transcoding
Hardware-based Media Encryption with SRTP

Allo Transcoding Module can provide you the following Media Service

Media codec transcoding through Allo Transcoding card with Full RTP Transcoding (G.711, G.722, G.729, G.726, G.723.1, iLBC, AMR, G.722.1)
SRTP media encryption through Allo Transcoding Card
T.38 Fax Bridging (G711 to T.38 Packets)

Tech Specs

Functional Mode	Topology Hiding with SIP Deep Packet Engine
SIP Intrusion/Prevention	~400+ SIP Attack Signatures Support
Throughput	~300 Mbps
No of Concurrent Channels Supported	100 concurrent channels
Logging	Local Security Event Console, Remote Syslog
Device Management	Web GUI via Https & SSH CLI
Hardware	Cortex A9 Quad Core Processor at 1.1GHz
Primary Storage	Supports 8/16/32/64 Gigabyte Module (Pluggable)
RAM	2 GB
Interfaces	2 Fast Ethernet Interfaces, 1 port fast Ethernet, 10/100 Mbits

Physical & Environmental

Operation Temperature	10°C to 40°C (50 F to 104 F)
Storage Temperature	0°C to 50°C (32°F to 122°F)
Operating Humidity	10% to 90%, Non-condensing
Storage Humidity	5% to 95%, Non-condensing
Dimensions	115mm (L) X 110mm (B) X 34mm (H)
Weight	250gms
Power Input	05V DC / 2.0 A