RFP L42 WLAN
Features
DECT
- All 120 DECT channels supported for maximum use of DECT capacity
- 8 simultaneous voice channels per SIP-DECT base station, 4 additional channels for handover
- Synchronisation of RFPs via DECT radio interface
- GAP standard supported
- Connection handover in line with the GAP standard
- DSAA authentication between base and handset
- Support of DECT encryption
- Integrated DECT antenna
- External dipole for WLAN
VoIP
- VoIP connection using RTP/RTCP protocol
- G.711 / G.723.11 / G.729AB1 codec depending on required voice quality and available bandwidth
- Quality of service supported by Diffserv/ToS Flag
- Adaptive jitter compensation
- Echo cancellation/suppression
- Voice activity detection and comfort noise generator
Ethernet
- BaseT connection via Ethernet 10/100 Mbit
- Power supply in line with Power over Ethernet standard IEEE 802.3af, class 0
- IPv4
- Support of different VLAN (virtual LANs), for the separation of DECT and WLAN and the various profiles or SSIDs
WLAN Access Point
- Support of 802.11 b/g for WLAN enabling b, g or mixed b/g usage
- Adjustable transmission power level for easy network planning
- Two adjustable external aerials
- Central service interface for all WLAN Access Points
- 802.11d Multiple Regulatory Domains, enabling country specific WLAN channel selection
- Wireless multimedia extensions (WME) for quality of service.
Security Features
- Wired Equivalent Privacy (WEP), set able for 64, 128 and 256-bit encryption
- WPA1 (Wi-Fi Protected Access) encryption2
- Authentication of stations with RADIUS 802.1x server
- WPA2 with asymmetric encryption
- White list for allowed WLAN stations for up to 64 MAC address entries
- 64-entry associated stations list
- Hidden Service Set Identifier (SSID)
- Multiple SSID enables several parallel WLAN networks within one access point infrastructure
Service and Installation
- 4 LEDs signalling the current state of operation
- Central configuration via
- web configurator
- Central system journal
- Central cluster administration
- Whirring alternatively from below (cable duct) or from above (suspended ceiling)
Technical Data
- Power supply:
- Power over Ethernet IEEE 802.3af, class 0 or
- 230 V AC-adapter
- Ambient temperature: -5°C to +45°C
- Relative humidity: 0 to 95% (non-condensing)
- Storage temperature: -40°C to +70°C
- Current consumption: 150mA
- Type of ingress protection: IP 20
- Flame resistance UL94 V0-5VB
- Wall-mountable
- Colour: ice grey
- Weight: 467 g (without AC adapter)
- Dimensions (W x H x D): 195 x 200 x 30 mm (without antenna)
Requirements
Part Numbers RFP L42 WLAN
- RFP L42 WLAN
Part no. 68785
- AC adapter (global)
Part no. 68744
for EMEA, NA, UK and Australia
(1) additional licence required
(2) Not recommended for use with Centrino WLAN Clients, which should be used with WPA2 in order to achieve full compatibility.
Note: The item is new in its original packaging, the packaging is slightly damaged by a sticker.
| Condition: |
New |
| Shipping weight: |
0,80 kg
|
| Item weight: |
0,50 kg
|
|
PN:
|
68785.013
|
|
Country of origin:
|
DE
|
|
TARIC-Code:
|
85176990
|
Product safety information
Manufacturer information:
Mitel Deutschland GmbH
Zeughofstrasse 1
Berlin
Berlin, Deutschland, 10997
beratung@mitel.com
https://www.mitel.com/
There are no reviews yet.
