Aastra RFP 43 WLAN connects two mobility standards: DECT, which enables the use of mobile system phones, and an integrated WLAN Access Point, which provides flexible access of PCs or other workstations to the company’s network.
Highlights of the RFP 43 WLAN
RFP 43 WLAN offers - due to integrated IEEE 802.11n compatible WLAN Access Point - significant advantages compared to a separate infrastructure for DECT and WLAN:
- Only one access point for both technologies (DECT and WLAN)
- Only one switch-port is required (PoE recommended)
- Integrated, centralized management and setup for DECT and WLAN
- Net View Management
- RFP 43 WLAN Access Points can be groupe in cluster
- The WLAN-properties within one cluster can be managed for all access points simultaneously
- It is not required to administer the access points individually
ADDITIONALLY RFP 43 WLAN PERMITS
- easy installation due to preinstalled software
- simultaneous use as OpenMobilityManager (OMM) in the network
Features
DECT
- All 120 DECT channels supported for maximum use of the DECT capacity
- 8 simultaneous voice channels per RFP, 4 additional channels for handover
- Synchronisation of the RFPs via DECT radio interface
- GAP standard supported (incl. connection handover)
- DSAA authentication between base and handset
- Support of DECT encryption
- Antenna diversity
- DECT XQ to guarantee good speech quality in reflecting environments
- DECT security
VOIP
- VoIP connection using RTP/RTCP protocol
- G.711 / G.722 / G.729AB1 codec depending on required voice quality and available bandwidth
- Quality of service supported by Diffserv / ToS Flag
- Adaptive jitter compensation
- Echo cancellation / suppression
- Voice activity detection and comfort noise generator
- Secure VoIP SRTP/TLS
ETHERNET
- BaseT connection via Ethernet 10 / 100 / 1000 Mbit
- Optional SNMPv1/v2c, MIB II, read only, support of traps
- Support of VLANs (virtual LANs)
WLAN ACCESS POINT
- Support of:
- - IEEE 802.11n (2.4 or 5 GHz, MIMO 2T/2R)
- - IEEE 802.11a
- - IEEE 802.11b/g
- Adjustable transmission power level for easy network planning
- Central service interface for all WLAN Access Points
- 802.11d Multiple Regulatory Domains, enabling country specific WLAN channel selection
- Wireless Multimedia Extensions (WME) for quality of service
Security Features
- Wired Equivalent Privacy (WEP), set able for 64-, 128- and 256-bit encryption
- WPA1 (Wi-Fi Protected Access) encryption
- WPA2 with asymmetric encryption
- Authentication of stations with RADIUS 802.1x server
- White list for allowed WLAN stations for up to 64 MAC address entries
- 64-entry associated stations list
- Hidden Service Set Identifier (SSID)
- Multiple BSSID (Basic Service Set Identifier) enables four parallel WLAN networks within one access point infrastructure
Service and Installation
- 4 LEDs signalling the current state of operation
- Central configuration
- Central system journal
- Central cluster administration
- Wiring alternatively from below (cable duct) or from above (suspended ceiling)
Technical Data
- Internal antennas for DECT, 2.4 GHz WLAN and 5 GHz WLAN
- Power supply:
- Power over Ethernet IEEE 802.3af, class 3 or
- 100-240 V AC-adapter
- USB 2.0 host port for future extensions
- Ambient temperature: -5°C to +45°C
- Relative humidity: 0 % to 95% (noncondensing)
- Storage temperature: -40°C to +70°C
- Type of ingress protection: IP 20
- Flame resistance UL94 V0-5VB
- Wall-mountable
- Colour: ice grey
- Weight: 467 g (without AC adapter)
- Dimensions (W x H x D): 195 x 200 x 30 mm
PART NUMBERS
-
RFP 43 WLAN 68636
-
AC adapter for EMEA UK, Australia 87-00002AAA-A
| Condition: |
Refurbished |
| Shipping weight: |
0,80 kg
|
| Item weight: |
0,50 kg
|
| Condition: |
Refurbished |
Product safety information
Manufacturer information:
Mitel Deutschland GmbH
Zeughofstrasse 1
Berlin
Berlin, Deutschland, 10997
beratung@mitel.com
https://www.mitel.com/
There are no reviews yet.
