beroNet BF4004GSMbox berofix 400 Box Bundles, 2xBF2GSM and 4xBFANTS

beroNet BF4004GSMbox berofix 400 Box Bundles, 2xBF2GSM and 4xBFANTS

Out of stock

4 GSM

SKU	1593
HAN	BF4004GSMbox
Category	Interface & Gateway
Manufacturers

Item currently out of stock

Currently out of stock

Modular & Expandable
The Baseboard is modular where you can plug and mix different access modules in analog (FXS/FXO), digital (BRI/PRI ISDN) and GSM all on the same card. A PCM Bus interconnection between berofix devices to enable hardware bridging for building mixed and high-density transparent Voice, Video, Data and Fax transmissions. The berofix Baseboard is compatible and tested with numerous SoftPBX’s like 3CX, Asterisk, Freeswitch, FreePBX, Trixbox, Elastix; Gemeinschaft and many more.

5 Minute Installation: It’s Plug & Play!
berofix is OS independent and can be used for Linux/Unix Windows and MAC OS. This new advancement in technology incorporates a proprietary beronet OS on the Baseboards which is automatically detected by your system as just ‘Network card’. All necessary drivers are automatically loaded by the host machine’s OS.

Technical Details

Codecs: G.723.1 and Annex A, G.729 a/b, G.726, G.711 u/a
G.168/G.165 Echo Cancellation with Echo Path Change Detection, up to 128ms
Voice Activity Detection / Comfort Noise Generation
DTMF Digit Detection and Generation
T.38 fax relay (v.27ter, V.29, and V.17)
SIP User Agent IETF RFC3261 compliant
SIP over UDP/TCP with optional TLS support (SIP signalling only)
TDM bridging over 2 berofix devices through PCM bus interconnection, 8.192 kB/s
PCI 2.2 compliant 3.3V (chipset Realtek 8139CL), also fits to 5V slot but 3.3V needed
PCI express 1.1 compliant (chipset Realtek 8111C)
Dimensions: 167 x 9,85 x 15mm
Weight: 110g
Operating temperature: 0-70°C
Compliance: CE (EN55022, EN55024, EN60950)

Available Modules:

4 Port BRI Module (BF4S0)
1 Port PRI Module (BF1E1)
2 Port PRI Module (BF2E1)
4 Port FXO Module (BF4FXO)
2/2 Port BRI/FXS Hybrid Module (BF2S02FXS)
4 Port FXS Module (BF4FXS)
2 Port GSM Module (BF2GSM)

Accessories:

BFBridge (to use all 4 RJ45 slots on a Baseboard with one bf4S0,bf4FXS,bf4FXO,bf2S02FXS)
BFTAdapters (to connect 2 BRI or analog Lines on one RJ45 of the berofix)
BFPCM (PCM Cable to interconnect berofix Baseboards)
BFE1Cross, (1.8m E1/T1 "cross-over" cable)
BF19bracket (19 inch rack mount bracket for berofix Boxes)
BFANTS (small 7 cm stock antenna for BF2GSM modules)
BFANTL (2m cable antenna with magnetic foot for BF2GSM modules)
BFFXXCable (RJ45 to RJ11 cable to use with berofix analog modules)