Cisco POES5 5 Volt Power Over Ethernet Splitter (EU)

Highlights
? Maximize your investment in Power over Ethernet
? Provide power to non-PoE Cisco SPA900 phones and analog telephone adapters
? Designed to fit into the Cisco SPA900 IP phone stand
? Easy to install - no tools, no software - and works on standard Category 5 Ethernet cable

Product Overview
The Cisco® POES5 5-Volt Power over Ethernet Splitter (Figure 1) lets you put your Cisco Small Business IP Phones almost anywhere, by removing the requirement for a nearby power outlet. The POES5 sends power and voice over IP (VoIP) over one Category 5 cable to your Cisco phone. When it’s time to add or relocate a phone, the POES5 can simplify your installation.

The Cisco POES5 provides an 802.3af Power over Ethernet (PoE) port for connection to a PoE switch. The compact POES5 connects to the standard DC power input and RJ-45 Ethernet port on the Cisco IP phone (or other supported Cisco Small Business VoIP product) via two “split” cables. The POES5 can then be tucked away and concealed in the stand attached to the Cisco Small Business IP Phone.

Simplify your installation and place your Cisco Small Business IP Phones, or any of the other supported Cisco Small Business VoIP products, in a preferred spot with the Cisco POES5 5-Volt Power over Ethernet Splitter

Features
? Complies with IEEE 802.3, 802.3u, and 802.3af
? Green LED light indicates available power
? Designed to fit into the Cisco IP phone stand (or optional Cisco MB100 Wall-Mount Bracket)
? Operates with the Cisco SPA901, SPA921, and SPA941 IP Phones
? Operates with the Cisco SPA3000, SPA9000 Voice System, and PAP2T Internet Phone Adapter with 2 VoIP Ports
? Also operates with the Cisco SPA1001, SPA2000, SPA2002, SPA2100, SPA2102 Phone Adapter with Router, and SPA3102 Phone Adapter with Router

Specifications
Table 1 contains the specifications and package contents for the Cisco POES5 5-Volt Power over Ethernet Splitter.

Standards IEEE 802.3 10BASE-T, 802.3u 100BASE-TX, 802.3af
Ports 1 RJ-45 Ethernet port
Cabling type 1 combo-power/Ethernet cable attached to the device with DC power jack and RJ-45
Ethernet connector
LEDs 5V power
Connector type 1 combo-power/Ethernet cable attached to the device with DC power jack and RJ-45

Environmental
Dimensions 80 mm x 22 mm x 56 mm
Unit weight 0.76 kg
Power
? Output voltage accuracy ± 2.0% Max
? Output max current 5V: 2A
? Output min current 100 mA
? Input voltage 36 ~ 57V DC Ethernet connector

SKU:	1054
Category:	Network
Manufacturers:
Shipping weight:	0,15 kg
SKU:	POES5

There are no reviews yet.

Cisco POES5 5 Volt Power Over Ethernet Splitter (EU)

Please answer the question

Please answer the question