Introduction: UC100 is a multi-functional gateway, which integrates voice service (PSTN and VoIP) and data service (LTE 4G/WCDMA 3G). It provides three voice interfaces (including GSM/LTE, FXS and FXO), offering seamless connectivity to VoIP Network, PLMN and PSTN. Based on SIP, it not only can interacts with VoIP network, but also supports types of GSM/WCDMA/LTE frequency ranges, thus meeting the worldwide requirements about the mobile network. UC100 supports WiFi and has high-speed data-handling capacity, allowing users to enjoy high-speed internet surfing through WiFi or the LAN port.
With VPN transparent transfer function, UC100 is ideally suitable for personal use. Meanwhile, it is perfect for small and micro enterprises, providing high-speed internet access, good voice service and messaging service.
The UC100-1V is VoLTE.
If the carrier support VoLTE, you can use the voice call and LTE data at same time. If the carrier not support VoLTE, you can't use the voice and data at same time. Because, when use data, it work at 4G. when use call, it's will fall after rise to 2G.
The UC100-1V use different module base customer situation. Like USA customer use module EC25-A/V, Europe customer use module EC25-E. We can't list all module support frequency, but it's too much, if you need other frequency module for your county so please ask by email.
Key Features
- FXS/FXO/GSM//LTE interface on a single device
- Send/receive calls from PSTN/PLMN via FXO/GSM/LTE
- Flexible dial plan, via time, numbers, source IP etc.
- IVR customization
- High speed NAT forwarding, support WIFI hotspot
- Built-in SIP server, support up to 32 SIP Extensions
- User-friendly web interface, multiple management ways
Physical Interfaces
- FXSPort: 1
- FXOPort: 1
- SIM Slot: 1
- Ethernet Interfaces
- 1WAN&3LAN10/100 Base-T RJ45
- WIFI
- 2.4GHz 802.11b/g/n,2T2R
Voice Capabilities
- VoIP Protocols: SIP over UDP/TCP/TLS,SDP,RTP/SRTP
- Codecs: G.711a/µ law,G.723.1, G.729A/B, iLBC,G.726
- Silence Suppression
- Comfort Noise Generator(CNG)
- Voice Activity Detection(VAD)
- Echo Cancellation: G.168 with up to 128ms
- Dynamic Jitter Buffer
- Adjustable Gain Control
- Automatic Gain Control (AGC)
- Call Progress Tones: Dial Tone, Ring Back Tone, Busy Tone
- FAX: T.38and Pass-through
- NAT: STUN/UPnP
- DTMF: RFC2833/SIP Info/In-band
FXS
- Connector: RJ11
- Caller ID: Bellcore Type 1&2, ETSI,BT,NTTand DTMF
- Answer and Disconnect Signaling: Answer, Disconnect, Busy Tone
- Polarity Reversal
- Hook Flash
FXO
- Connector: RJ11
- Caller ID: FSK, DTMF
- Polarity Reversal
- Answer Delay
- Busy Tone Detection
- No Current Detection
Mobile Voice & Data (Internet)
- GSM/GPRS/EDGE: 900/1800MHz
- WCDMA(3G):
- UMTS/HSDPA/HSPA+ B1/B5/B8
- TD-SCDMA (please ask)
- EVDO/CDMA2000 (please ask)
- LTE(4G):
- TDD-LTE B38/B40/B41
- FDD-LTE B1/B3/B5/B7/B8/B20
- SIM/USIM: 1 USIM per Channel
- SIMCard: 1.8V, 3.0V
- Antenna: 3.0dB, SMA-Interface
- SMS/USSD
More frequencies please ask, there are different modules for match different country
Supplementary Services
- Call Forward (Unconditional/No Answer/Busy)
- Call Waiting
- Call Hold
- Call Transfer
- Hotline
- Do-not-disturb
- 3 Way Conference
Software Features
- Ring Group
- Routing Groups
- Caller/Called Number Manipulation
- Routing Base on Time Period
- Routing Base on Caller/Called Prefixes
- Routing Base on Source Trunks
- Dial Rules
- Failover Routing
- FXO Impedance Auto Match
- IVR Customization
- Auto Attendant Function
- CDRs
Maintenance
- Web GUI Configuration
- Telnet Management
- Configuration Restore/Backup
- Multiple Languages Supported
- HTTP/TFTP/FTP Firmware Upgrade
- Auto Provision
- CDR Report and Export
- Syslog
- Ping and Tracert
- Traffic Statistics: TCP,UDP,RTP
- Network Capture
- NTP
Environmental
- Power Supply: 12VDC, 1A
- Power Consumption: 10W
- Operating Temperature. 0°~ 45°
- Storage Temperature: -20°~80°
- Humidity: 10%-90% Non-Condensing
- Dimensions (W/D/H): 126×75×25mm
- Unit Weight: 0.7kg
Product Information
UC100 LTE has several variants model to meet the requirements of our customers.
Dinstar UC-Series:
- UC100-1V1S1O (1 VoLTE,1 FXS, 1 FXO, WIFI, 1 WAN 3 LAN, Built in SIP Server) - only has VoLTE ( voice and data both, 4G) UC100-1V1S1O with EC25E module
UC100-1T1S1O (1 LTE-Data,1 FXS, 1 FXO, WIFI, 1 WAN 3 LAN, Built in SIP Server) - only LTE-DataUC100-1T1S (1 LTE-Data,1 FXS, WIFI, 1 WAN 3 LAN, Built-in SIP Server)UC100-1S1O (1 FXS,1 FXO, WIFI,1 WAN 3 LAN, Built-inSIP Server)UC100-1S (1 FXS,WIFI, 1 WAN 3 LAN, Built-in SIP Server)
Note
The 1V and 1T all is same, just 1V support VoLTE/call and 1T for data only. VoLTE is only supported with the new UC100-1V1S1O (1V) version!
UC100-1V1S1O support voice and data both, 4G. Voice means GSM and VoLTE both, base your operator. That's means if the Operator not support VoLTE, the device can use 2G for call or 3G/4G for data. When try to call, it will fall after rise to GSM and data drop. The Dinstar 1V-Series means VoLTE, data and voice both.
Product safety information
Manufacturer information:
Dinstar Technologies
Floor 18, Building 7A, Vanke Cloud City Phase 1
Guangdong
Shenzhen, P.R., China, 518000
dinstar007@outlook.com
https://www.dinstar.com
Responsible person:
VoIPDistri, Mathias Gottensträter
Im Hagen 3
Nordrhein-Westfalen
Halle, Deutschland, 33790
info@voipdistri.com
https://voipdistri.com
IP PBX for SMEs - DINSTAR UC100
DINSTAR Universal Gateway UC100 a small IP PBX
Compact, Versatile, Flexible
32 SIP users, 8 concurrent calls
1 LTE / GSM, 1 FXS, 1 FXO
Flexible Routing
User-friendly Web GUI
There are no reviews yet.
