ALLNET All-GHN101-2-wire-Set
- 500Mbps G.hn port as home network backbone using existing phone line
- Two 100 / 1000Mbps Gigabit Ethernet ports for FTTH, DSL / cable modem and Ethernet terminals (PC, set-top box, ...)
- Energy efficiency (Green) Ethernet support
- A maximum distance up to 800 meters above G.hn Port
- Built-in filter to eliminate irradiation by telephone or PSTN Line
- Indication of signal quality
-
Not work in VDSL mixing mode, because VDSL transmits up to the frequency spectrum 36MHz! Alternatively the Sendtek PES822/PES822N G.hn modem is coexistent with VDSL.
- QoS Priority Mapping and support
- Configuration VLAN
- control IGMP Snooping
- Status and statistics of the Ethernet interface
With the G.HN Gigabit Ethernet Bridge, you can, with the existing telephone line, expand your home network at home. No additional network wiring is necessary. You can simply use the existing telephone line in the wall. With the G.HN modem so they can quickly expand your Netzerk without rewiring and with little effort.
Network Standard:
ITU G.9960 G.hn over telephone line
IEEE 802.3u Fast Ethernet 100M
IEEE802.3ab 1000M Gigabit Ethernet
IEEE 802.3az Energy Efficiency Ethernet
connectors:
Ethernet: Two RJ-45 Connectors
G.hn: Two RJ-11 connectors, one for G.hn, the other for Phone-Line Bypass
G.hn Interface:
Transmission power and spectrum
6 +/- 1 dBm @ 6 ~ 76 MHz
PHY measured rate: 60m: 251 Mbit / s, 100m: 241 Mbit / s, 200: 201
Mbit / s, 300: 92 Mbit / s, AES 128 Encryption
Gigabit Ethernet interface:
100 / 1000Mbps Auto Negotiation
MDI / MDI-X auto crossover
Quality of Service:
Priority Mapping Based on IEEE 802.1p
Guaranteed G.hn Parameterized QoS
Management:
GUI, Web browser, and TR-069 (Optional)
IPv4 and IPv6 support
Queuing Scheme Based on 802.1p / TOS
TagVLAN ID Tag / untag or passthrough
GMP snooping Control
Statistics and Status
LED display:
"Power" LED
G.hn "Link / Activity / Quality" LED
Ethernet "Link / Activity" LED x 2
Working environment:
Working temperature: 0 ° ~ 50 ° (32 ° ~ 120 °)
Temperature Storage: -10 ° ~ 65 ° (14 ° ~ 149 °)
Humidity: 10% ~ 95%, Non-condensing
Power consumption:
3.5W at 12 volts
Ambient operating temperature: 0 ° C ~ 50 ° C (32 ° F ~ 122 ° F)
Temperature Storage: -20 ° C ~ 70 ° C (-4 ° F ~ 150 ° F)
Humidity: 10 to 90% (non-condensing)
Mass weight:
Width / depth / height: 130mm x 95mm x 32mm
Weight: 135g (without power supply)
