Sendtek PES822 Phoneline Gigabit Ethernet Bridge, HomeGrid ITU G.9960 via telephone line, 2-wire network connections, Coexistence in ADSL / VDSL mixed mode

Item number: 6677



2wire Gigabit network via 2-wire connection or telephone cable, Coexistence in ADSL / VDSL mixed mode

Category: G.HN HomeGrid

Price on application
Short supply

The PES822 is based on the new technology offering Gigabit Ethernet to phonelines bridge with a build-in wireless WiFi 802.11n access point.

The technology is the HPNA3 successor, contributing better performances and more features. It can be used with any kind of xDSL modem/router type.

Why do you need it?
The PES822 adapter provides very high speed networking solution, with stable and reliable performances for the entire home area. The adapter is tuned to fulfill users demands for streaming multimedia content to PCs, SmartTV sets, streamers, video games, , Pads, smart-phones, etc?.

The PES822 is built to interconnect between Fast Internet modems/routers and Ethernet compatible devices through the existing/installed home phonelines, allowing fast Internet to expand to far end locations, such as safety rooms, basements, multi-floor apartments, etc. The PES822N is a direct accompanying device to the PES822, offering Ethernet to Phoneline bridge with build-in WiFi Router.

Easy to Install
The PES822 is a real Plug & Play device with endless networking possibilities over existing cabling. It is easy to install and activate, thus avoiding needs for driver installation or support by networking technicians. It is perfect for most data applications requiring high-speed Internet connections over broad bandwidth networks.

  • Perfect for transferring large multimedia files (e.g. movies, music, and photos) connection via an existing 2-wire telephone line (home networking in the house)
  • 2x 100 / 1000Mbps Gigabit network connections for Internet connection via cable Modem, ADSL / VDSL, fiber optic connection and home networking, company networks (games console, computer, etc.)
  • Easy installation in multi-floor houses and in-house shelters/basements/safety-rooms.
  • Plug & Play solution - no need for special configuration set-up tools
  • Energy efficiency (green) Ethernet support Provides up to Gigabit/sec over phoneline, point-to-point and point-to-multipoint configurations
  • Built-in filter to eliminate noise from telephone or PSTN line
  • Signal quality indicator
  • Coexistence in ADSL / VDSL mixed mode (36-76MHz) on the same telephone line possible!
  • Communication range up to 300 meters over phoneline
  • Quality of Service (QoS) priority and mapping support
  • VLAN TAG configuration 
  • IGMP Snooping Control 
  • Based on the International Telecommunication Union (ITU) standard?s family
  • Superb reliability and compact size design
  • Status and statistics of the Ethernet interface
The Sendtek G.HN 2-wire Ethernet Bridge is compatible with ADSL / VDSL in the frequency range 36-96MHz, which makes it possible for the first time to extend a gigabit network over the existing telephone line in private homes or in residential buildings, hotels without the need for expensive new lines to draw.

Note: You always need 2 devices like 2x PES822 or 1x PES822 and 1x PES822N (WLAN AP), but 2x PES822N not work!

Network standard:
ITU G.9960 over Phoneline
IEEE 802.3u 100M Fast Ethernet
IEEE802.3ab 1000M Gigabit Ethernet
IEEE 802.3az Energy Efficiency Ethernet

Ethernet: 2x RJ45 Ports 2x RJ11 ports, one for data transfer and the other for analogue telephone connection data transfer:
4 +/- 1 dBm @ 36 ~ 76 MHz
Maximum speed and distance
Up to 600Mbps ; up to 300 meters
AES 128 data encryption

Gigabit Ethernet interface:
100/1000Mbps Auto Negotiation
MDI/MDI-X Auto Crossover

Quality of Service:
Priority Mapping Based on IEEE 802.1p
Guaranteed Parameterized QoS

GUI, Web Browser
IPv4 und IPv6 Support
Queuing Scheme Based on 802.1p/TOS
Tag VLAN ID Tag/UnTag oder Pass Through
GMP Snooping Control
Statistik und Status

"Power" LED "Link/Activity/Quality" LED
Ethernet "Link/Activity" LED x 2

Power consumption:
<4W bei 12 Volt

Environmental Conditions:
Temperature operation: 0 ° C ~ 50 ° C (32 ° F ~ 122 ° F)
Temperature Storage: -20 ° C ~ 70 ° C (-4 ° F ~ 150 ° F)
Humidity: 10 to 90% (non-condensing)

Mass weight:
Width / depth / height: 130mm x 95mm x 32mm
Wall mounting Mounting bracket on rear of unit

Weight: 150g (without power supply)

ATTENTION: The 2wire version is designed for a point-to-point solution. It is NOT possible to establish multiple connections in one multiple cable. These pairs would interfere with each other. In electronics this is called overtalking. If you use multi-wire bundle systems, VOIPDISTRI also has VDSL2 vectoring technology in their portfolio.

Shipping weight: 0,40 Kg
Product weight: 0,40 Kg
Average product review

Share your experience with other customers:

Please login first to add a tag.