Features
Splits power and data from PoE Input
1-port PoE Power+ Data input
2-port Data output (Switch function)
1 DC Out + 1 DC In (5-pin Terminal Block)
Able to work with 12VDC input no PoE
Support IEEE802.3af/at PoE
Support 10/100/1000Base-TX
Distance up to 100 meters
Supports output power up to 20W
12VDC output voltage
Short-circuit protection for power output
IP40 rugged metal housing and fanless
Support DIN-Rail & Wall-mount installation.
Extensive LED indicators for PoE diagnostics
Wide operating temperature -40 ~ 80°C
Overview
SPL01 series is an Industrial Grade, Gigabit Ethernet, PoE Splitter, designed to deliver data, via RJ-45 Ethernet connector, and electrical power, via screw terminal block, to non-PoE devices. This device saves the high cost of running separate electrical service to edge devices. The SPL01 acts as PD equipment and can be powered by standard PoE IEEE802.3af/at PSE (Power Source Equipment) switches or work when paired with INJ301 PoE Injectors. The data transmission, up to Gigabit speeds, with power output voltages of 12VDC, run simultaneously up to the Ethernet limit of 100 meters. Simple settings of the SPL01, make it a plug and play device, requiring no tools or software configuration, and provides ease of use, with flexible installation and high reliability. With 2-port RJ45 data output, SPL01 can be function as switch. With dual power input (PoE input + 12VDC input), the PoE splitter can work when there is no PoE input, that is to say, SPL01 can automatically recognize the power input (default in PoE input, switch to 12VDC input when PoE not work).
Technical Specifications
Ethernet
Standards:
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE802.3af Power over Ethernet
IEEE802.3at Power over Ethernet
Processing Type:
Forward
Half-duplex, Full-duplex
Forward Filter Rate: 1,488,000pps (1000Mbps)
Cabling: 1000Base-T: Cat5 or above
Maximum Distance: Cat5 UTP up to 100m
Interface:
“PoE (Power + Data)” Input Port: 1 x RJ-45 10/100/1000Base-T
“Data” Out Port: 2 x RJ-45 10/100/1000Base-T
DC Out/In Plug Connector: 1 removable 5-Pin terminal block
Power over Ethernet
PoE Standard: IEEE 802.3af/at Power over Ethernet
Number of devices that can be powered: 1 (DC12V) (Vary on device’s power requirement; cannot be over 20 watts.)
Environmental
Operating Temperature: -40°C to 80°C (-40°F to 176°F)
Storage Temperature: 0°C to 85°C (-40°F to 185°F)
Relative Humidity: 5% to 95% non-condensing
MTBF: >200,000hrs
Electrical and Mechanical
Power Output: 20W 12VDC (Terminal Block)
Power Consumption: 25W Max.
LED Indicators:
PWR: Power ON
POE/12V: PSE Power IN, 12VDC Power OUT
Dimensions (WxDxH): 95 x 70 x 30 mm
Weight: 0.25Kg
Casing: Aluminum Case
Mounting Options: DIN-Rail / Wall-mount
Regulatory Approvals
ISO9001
FCC part 15, Class A
EN55022:2006+A1: 2007 Class A
Surge Protection:
RJ45: 1KV
Power: 500W
ESD: 4KV/8KV
Ordering Information
Model: SPL01
Industrial PoE splitter with 2-port Switch function: 1-port PoE+ In + 2-port Ethernet Data Out (switch function), maximum output of 20 W at 12VDC, Support DIN-Rail mounting and Wall mounting installation, -40 to 80°C operating temperature
Mounting Options
Default DIN-Rail Bracket installed; Wall Mount Bracket is included.
Power Options
20W 12VDC output with 2-pin open wire terminal block
