= The Propeller devices from LigoWave have a unique antenna characteristic changing mechanism for simple vertical or horizontal orientation based on the use case of the device. It is recommended to assemble the propeller in a horizontal position for a client mode. This way the antenna beam-width in the vertical polarization will be narrow (15° on a 5 GHz model and 35° on a 2 GHz model) and on the horizontal polarization (60° on a 5 GHz model and 70° on a 2 GHz model). This ensures easy antenna alignment when installing the device without a need to tilt it upwards or downwards. Also, based on the test results in Table 1, the signal of the base station is received better and noise coming from the surrounding devices is lower. When a Propeller is assembled in a vertical position the antenna characteristics switch and vertical polarization beam-width is wider while horizontal polarization beam-width is narrower. This antenna orientation is better for the access point mode, where wider area coverage is necessary. Propellers can be used as WI-FI hotspot APs in outdoor networks when the device is assembled vertically and the Infinity series software version is loaded.
LigoWave LigoDLB Propeller 5
- 5.150 - 5.850 MHz (FCC 5.150 - 5.250 and 5.725 - 5.850 MHz)
- 80.000 PPS
- 170 Mbps capacity
- High output power of 29 dBm
- Integrated 15 dBi directional antenna
- Smart polling data transmission protocol (iPoll 2)
- Free WNMS Wireless Network Management System
- HTML 5 based graphical user interface
- mast mounting
- WLAN standard: IEEE 802.11 a/n, iPoll (proprietary)
- Antenna configuration: MIMO 2x2
- Frequency range: 5.150 - 5.850 MHz (FCC 5.150 - 5.250 and 5.725 - 5.850 MHz)
- Output power: up to 29 dBm (country dependent)
- Reception sensitivity: Varying between -97 and -75 dBm modulation dependent
- Channel bandwidth: 5, 10, 20, 40 MHz
- Modulation types: 802.11 a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
- Data rates:
802.11 n: 300, 270, 240, 180, 120, 90, 60, 30 Mbps
802.11 a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
- Error correction: FEC, Selective ARQ
- multiplexing: TDD (Time division duplex)
- Antenna type: integrated directional antenna, dual-polarized
- Antenna gain: 15 dBi
- Ports: 1x 10/100 Base-T, RJ45
- Operating mode: Bridge, Router
- Dimensions: 175 x 65 x 29mm
- Mass: 94 g
- Power supply: 12 - 24 VDC passive PoE (24 V passive PoE adapter included in delivery)
- Power supply: 100 240 VAC
- Max. Power consumption: 4.5 W
- Temperature range: -40°C ~ +65°C
| Shipping weight: |
0,50 kg
|
| Item weight: |
0,50 kg
|
|
PN:
|
DLB-PROP-5
|
Product safety information
Manufacturer information:
LigoWave
Kareiviu st. 11B
Vilnius
Vilnius, Litauen, 09109
support@ligowave.com
https://www.ligowave.com
There are no reviews yet.
