The NV-320DP is low cost Copper/Fiber to xDSL solution using the G.993.2 VDSL2 standard technology using only a single copper wire pair. With 1000Base-X SFP slot, NV-320DP is designed specifically for FTTdp/FTTC and supporting both symmetrical and asymmetrical transmission at up to 160/160Mbps and 2Mbps / 500Kbps at 3000 meters, this is a perfect solution to extend LAN to buildings, hotels, hospitals or any location outside the reach of 10/100/1000Base-T (Ethernet) or fiber optic.
Efficient Management
To offer a variety of application, NV-320DP is equipped with DIP switch for mode selection, which offer customer a convenient way to configure setting depending on your usage. For more band profile detail, please refer to user manual.
Plug&Play
NV-320DP is a relatively easy-to-use Ethernet Extender. There is no complicated procedure to set up a network, NV-320DP supports Auto-Negotiation function, which the only thing customer should do is Plug & Play, and the rest will be done by NV-320DP.
2K bytes Jumbo Frame(MTU)
More and more people are using OTT media services and Video Conference/Meeting during Covid-19 restriction. NV-320DP supports Jumbo frame (MTU) 2K bytes on VDSL side, which makes NV-320DP the most suitable and reliable modem to above usage.
Features
- Supports 2 x 10/100/1000BASE T& auto –MDIX for RJ-45 port
- Supports 1 x 1.25G SFP Slot
- Cost effective Copper/Fiber to xDSL bridge function for FTTDP / FTTC application
- Up to 160/160Mbps high bandwidth
- Maximum distance up to @ 3km (9842ft)
- Selectable CO and CPE mode via DIP switch
- Selectable G. INP mode
- Selectable 8 band profile
- Supports DIN-Rail ( Optional ) installation
- Compact in size , easy installation
- Plug & Play
- Flexible application & installation
- Support Jumbo frame(MTU) 2K bytes on VDSL side
NV-320DP Applications
Even though Fiber optic is a well developed technology, it still can't reach some places due to cost & physical limit. To extend Fiber optic service to region where Fiber optic infrastructure is not advanced, NV-320DP will play an important role in such situation. With transmission at up to 160/160Mbps and 2Mbps / 500Kbps at 3000 meters, NV-320DP is suitable for FTTdp/FTTC network scenario, and is a perfect solution to extend LAN to buildings, hotels, hospitals, office, etc.
Specifications
Copper/fibre VDSL2 bridge converter with 2x 10/100/1000 Mbps RJ45 port,1x RJ11 port / 2pin terminal block for VDSL2, 1x 1000Base-X SFP port, maximum bandwidth 160Mbit/s over two-wire line, configuration of CO (master) or CPE (slave) mode as well as VDSL2 profile and G. INP error correction via DIP switch, supports point-to-point connections up to 3km distance, metal housing, top-hat rail mounting available (bracket DIN rail type B), power supply 12V DC, incl. EU plug-in power supply unit
