The OBi300 has 1-phone port. It supports up to 4-VoIP services such as a multitude of SIP-based VoIP services plus OBiTALK calling. Of all the OBi devices available today, at about 2.7 inches square, the OBi300 packs the most power per square inch. The OBi300 supports T.38 fax for reliable facesimile calls over the Internet as well as a USB port for use with OBiWiFi and OBiBT.
1 line VoIP adapter connects home office analog phones to the digital voice communications world
- Expand your service portfolio by offering flexible voice and fax applications to home offices
- Easily configure devices and provide better on-going support through the secure OBiTALK device management portal
- The only VoIP adapter that supports optional WiFi accessory to expand phone placement locations
- Connect up to 1 analog phone or fax machine to transition voice communications to the digital world
Provide your customers new capabilities with WiFi and Bluetooth. Polycom OBi300 is never tied to any inconvenient Ethernet port location. It can be placed anywhere within range of a 2.4 GHz or 5 GHz, 802.11ac wireless access point when used with the Polycom USB WiFi adapter. Similarly, the USB Bluetooth adapter pairs a user’s mobile phone or Bluetooth audio headset so they can place and answer calls using their mobile service via analog phones.
Product requirements
- Active Internet Connection
- Analog Touch Tone Phone
- Access to Internet Via a Switched Ethernet Port on Home or Office Router
- (Optional) Active Internet Phone Service Subscription with All Required SIP Credentials to Make and Receive Calls
Polycom OBi300 ships with
- OBi300 Voice Service Bridge and Telephone Adapter
- EU Power Adapter
- 1 x RJ-45 Ethernet Cable (80 inches/203 centimeters)
- Quick Start/Installation Guide
Product dimensions (L x W x H)
- 6.9 cm x 6.9 cm x 3.0 cm (2.7 in x 2.7 in x 1.2 in)
Unit weight
- 198 grams/7 ounces
- Shipping weight: 340 grams/12 ounces (Including Power Supply, Ethernet Cable and Packaging)
Interface features
- Internet (WAN): 1 x 10/100BaseT Ethernet Port (802.3)
- Phone (FXS): 1 x RJ-11 FXS Analog Phone Port
- USB: USB 2.0
- Reset Button: Located on Bottom of Case
- LEDs: Power/Status, Ethernet Activity (WAN), Phone
- LED indications: Power On, Status, upgrade in Progress Status, Packet RX/TX, Phone Port Status
Telephony features
- Call Routing Rules
- Automated Attendant with Configurable Answer Delay
- PIN Access Control to AA (Up to 4 PINs)
- Recursive Digit Map for Call Routing (AA, Phone, Voice Gateways, Trunk Groups)
- AA Configurable Outbound Call Routing Rules
- SIP Service Configurable Inbound Call Routing Rules
- Fax Pass Through (G.711)
- T.38 Fax Relay for Fax over IP
- Modem Pass Through (G.711)
- In-Band DTMF (G.711)
- Out of Voice Band DTMF (RFC 2833)
- Out of Voice Band DTMF (SIP INFO Method)
- Call Progress Tone Generation
- Tone Profile per SIP SP and OBiTALK Service
- Ring Profile per SIP SP and OBiTALK Service
- Star Code Profile per SIP SP and OBiTALK Service
- Full Duplex Audio
- G.165, 168 Echo Cancelation
- VAD-Voice Activity Detection
- Silence Suppression
- Comfort Noise Generation
- Three Way Conference Calling with Local Mixing
- Hook Flash Event Signaling
- Flash Hook Timer
- Caller ID-Name and Number per Bellcore, ETSI, DTMF, and NTT
- MWI-Message Waiting Indicator
- Visual Message Waiting Indication (VMWI)
- Daylight Savings Time Support-Worldwide
- Caller ID Enable/Disable
- Caller ID Number
- Caller ID Name (Alphanumeric)
- Caller ID Spoofing
- Call Waiting
- Maximum Session Control
- Call Forward-Unconditional
- Call Forward on Busy
- Call Forward on No Answer (Ring Count Configurable)
- Call Transfer Enable/Disable
- Anonymous Call Block
- Anonymous Call
- Do Not Disturb
- Call Return
- Repeat Dialing
Data networking
- MAC Address (IEEE 802.3)
- UDP (RFC 768) in SSL/TLS
- TCP (RFC 793) in SSL/TLS
- IP version 4, IPv4 (RFC 791)-Static IP and DHCP Support
- ICMP (RFC 792)
- ARP-Address Resolution Protocol
- Domain Name System (DNS) A Records (RFC 1706) and SRV Records (RFC 2782) RTP (RFC 1889, 1890), RFC 5966
- RTP/RTCP (RFC 1889), DHCP Client (RFC 2131)
- DiffServ (RFC 2475)-Independently Configured: Service, SIP and Media
- ToS (RFC 791, 1349)-Independently Configured: Service, SIP and Media
- VLAN Tagging (802.1p-Independently Configured: Service, SIP and Media
- SNTP (RFC 2030)-Primary and Secondary NTP Servers
- LLDP-MED
Security
- Local Access Interface: IVR Password
- Remote Access Interface: User Name and Password Access via HTTP, TFTP- HTTPS
- Device Web Page Standard: HTTP v1.1, XML v1.0
- Secure Remote Provisioning: HTTP, HTTPS
VoIP features
- Four (4) Service Provider Configuration Profile Assignments (ITSP 1–4)
- Four (4) Service /Trunk Subscription Profile Assignments (SP 1–4)
- SIPv2 (RFC 3261, 3262, 3263, 3264)
- SIP over UDP
- SIP over TCP
- SIP over TLS
- 4 SIP Service Provider Service Sessions-Concurrent Operation
- 1 OBiTALK Service Session
- SIP Proxy Redundancy-Local or DNS Based SVR, Primary and Secondary Fallback List Restrict Source IP Address
- Maximum Number of Sessions-Independent per Service
- 4 Trunk Groups
- Voice Gateway-Direct Dialing
- G.711 A-Law (64 kbps)
- G.711 u-Law (64 kbps)
- G.726 (32 kbps) G.729a (8 kbps) iLBC (13.3, 15.2 kbps) Codec Pre-selection Code
- Voice Processing per SIP Service-TX/RX Audio Gain, Echo Cancellation
- Adjustable Audio Frames per Packet
- Codec Name Assignment
- Codec Profile per SIP SP and OBiTALK Service
- Dynamic Audio Payload
- Packet Loss Concealment
- Jitter Buffer (Adaptive)
- STUN
- ICE
- SUBSCRIBE/NOTIFY Framework (RFC 3265)
- NOTIFY Dialog, Line Status
- SUBSCRIBE Message Summary
- VoIP NAT Interworking
| Shipping weight: |
0,50 kg
|
| Item weight: |
0,40 kg
|
|
PN:
|
OBi300
|
Product safety information
Manufacturer information:
HP Deutschland GmbH
Herrenberger Straße 140
Baden-Württemberg
Böblingen, Deutschland, 71034
firmen.kunden@hp.com
https://www.polycom.com
There are no reviews yet.
