Sangoma A108DE Octal T1/E1/J1 PCI Express Card with Echo Cancellation

Out of stock

Sangoma digital telephony card 8-port E1/T1 Port Voice and Data Card 240 simultaneous voice calls (or 16.4 Mbps full duplex data) Hardware Echo Cancellation Linux and Windows Supported PCI Express bus A108DE-KIT

SKU	3236
HAN	A108DE-KIT
Category	PRI ISDN Ports
Manufacturers

Item currently out of stock

Currently out of stock

Eight ports of T1, E1 or J1 available with Telco-grade hardware echo cancellation - the ultimate high-density solution.

The Sangoma A108 is part of Sangoma’s family of Advanced Flexible Telecommunications hardware product line—it uses the same high-performance PCI or PCI Express interface that is providing superior performance in critical systems all over the world.The A108 supports up to 16.4 Mbps of full duplex data throughput or up to 240 voice calls using up to eight T1, E1, or J1 lines.

With Sangoma cards, you can take advantage of hardware and software improvements, as soon as they become available. The A108, like all cards in Sangoma’s AFT family, is field upgradable with crash-proof firmware. Choose the Sangoma A108D and A108DE, equiped with world class DSP hardware to achieve carrier-grade echo cancellation and voice quality enhancement functions for your telephone systems.

Technical Specifications

Eight T1/E1 ports with optimum PCI or PCI-Express interface for high performance voice and data applications
Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to any or all of the other ports so both T1 and E1 are supported simultaneously
Support for Asterisk^®, YateTM, CallWeaver^TM and FreeSwitch^TMPBX/IVR Projects, as well as other open source and proprietary PBX, Switch, IVR, or VoIP gateway applications
All of Sangoma’s AFT products use the same base PCI interface card. Fully compatible with all commercially available motherboards-proper PCI-standard interrupt sharing without manual tuning
Dimensions: 2U Form factor: 120 mm x 55 mm for use inrestricted chassis; includes high-quality, tested RJ45port-splitter cables and short 2U mounting clips for installation in 2U rack-mount servers
Autosense compatibility with 5 V and 3.3 V PCI busses
Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and/or data when they become available
Line decoding: HDB3, AMI, B8ZS
Framing: CRC-4, Non CRC4, ESF, SF, D4. Also compatible with Japan’s J1
A108E and A108DE PCI Express: 1 Lane PCI Express bus
Maximum operational power for PCI: 7.5 W (1.5 A @ 5 V) For PCI Express: 5.5 W (1.67 A @ 3.3 V)
Temperature range: 0 – 50 °C
32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention
Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems
Supports Robbed Bit Channel Associated Signaling(CAS) and ISDN PRI
T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications
Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU