Surge protective Device for phone Line for DIN rail with RJ11 Input/Output Port (telephone systems and fax machines)

Surge protective Device for phone Line for DIN rail with RJ11 Input/Output Port (telephone systems and fax machines)

Out of stock

SPD Typ 2

SKU	2880
HAN	BLSA-P2-48K
Category	Surge Protector
Manufacturers

Item currently out of stock

Currently out of stock

Phone line SPD for program-controlled telephone exchange and ringing telephones and fax machines lightning protection, automatic control and instrumentation lines, data lines, telephones, facsimile apparatus, and other equipment, as well as the sensors and secondary meters in the circuit loop; meanwhile, it can suppress induced lightning strokes from signal lines to prevent system equipment being damaged.

Features

SPD category: Type 2
Rated Working Voltage (Uo): 48V
DC Max Continuous Operating Voltage (Uc): 58V
AC Max Continuous Operating Voltage (Uc): 40V
Max working current (IL): 0.5A
Total nominal discharge current (Itotal): 10kA
Nominal discharge current (In): 5kA
Voltage protection level wire-wire D1 (UP): =120V
Voltage protection level wire-PE D1(UP): =120V
Voltage protection level wire-wire 1kV/us C3(UP): =90V
Voltage protection level wire-PE 1kV/us C3(UP): =90V
Response Time(tA): =1ns
Insertion Loss(10MHz): =0.5dB
Transmission rate: 2Mbps
Relative Humidity: =95%(25°C)
Working temperature range(TU): -40?---+80°C
Atmospheric Pressure: 86kPa...106kPa
Wiring methods: RJ11
Terminal crimping wire range: in-1×RJ11;out-1×RJ11
Housing material: Aluminum/UL V-0
Degree of protection(IP code): IP20
Installation methods: DIN 35mm rail

Note for installation in difficult environments with limited space. We have measured the device, it has the following housing dimensions:
ca: 68x25x25mm without top hat rail holder. Please think that the RJ11 plug is about 5mm from the telephone cable and the surge arrester about 5mm sticks out from the housing.