This powerful LTE router is designed as a Main/Backup Internet source where steady connection and high data throughput is required. Equipped with Dual-SIM and 4 x Gigabit Ethernet ports. RUTX09 has all advanced RutOS software and security features.
MOBILE
-
Mobile module 4G (LTE) - Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
-
SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
-
Status Signal strength, SINR, RSRPO, RSRQ, Bytes sent/received
-
Bridge Direct connection (bridge) between mobile ISP and device on LAN
-
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
-
Black/White list Operator black/white list
-
Multiple PDN Possibility to use different PDNs for multiple network access and services
ETHERNET
-
WAN 1 x WAN (can be configured to LAN) 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
-
LAN 3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
NETWORK
-
Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)
-
Network protocols TCP, UDP, IPv4, IPv6, ICMP, UDP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT
-
VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
-
Connection monitoring Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
-
Firewall Port forward, traffic rules, custom rules
-
DHCP Static and dynamic IP alocation
-
QoS Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
-
DDNS Supported >25 service providers, others can be configured manually
-
Network backup VRRP, Mobile and Wired WAN options, each of which can be used as backup
-
Load balancing Balance your internet traffic over multiple WAN connections
-
NetSnapper (optional) Mobile connection management, data compression VPN client (not available in standard FW)
-
SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)
SECURITY
-
Authetication Pre-shared key, digital certificates, X.509 certificates
-
Firewall Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
-
Atack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
-
VLAN Port based and tag based VLAN separation
-
Mobile quota control Set up custom data limits for both SIM cards
-
WEB filter Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
-
Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
-
OpenVPN Multiple clients and server can be running simultaneously, 12 encryption methods
-
OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
-
IPsec IKEv1, IKEv2, supports up to 4x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
-
GRE GRE tunnel
-
PPTP, L2TP Client/Server services can run simultaneously
-
Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code.
MONITORING & MANAGEMENT
-
WEB UI HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
-
FOTA Firmware update from server, automatic notification.
-
SSH SSH (v1, v2)
-
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
-
TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems
-
MQTT MQTT Broker, MQTT publisher
-
SNMP SNMP (v1, v2, v3), SNMP trap
-
JSON-RPC Management API over HTTP/HTTPS
-
MODBUS MODBUS TCP status/control
-
RMS Teltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS
-
CPU Quad-core ARM Cortex A7, 717MHz
-
RAM 256MB, DDR2
-
FLASH memory 256MB SPI Flash
FIRMWARE / CONFIGURATION
-
WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
-
FOTA Update FW/configuration from server
-
RMS Update FW/configuration for multiple devices
-
Keep settings Update FW without losing current configuration
FIRMWARE CUSTOMIZATION
-
Operating system RutOS (OpenWrt based Linux OS)
-
Supported languages Busybox shell, Lua, C, C++
-
Development tools SDK package with built environment provided
LOCATION TRACKING
-
GNSS GPS, GLONASS
-
Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS
-
NMEA NMEA 0183
-
Server software supported server software TAVL, RMS
-
Mobile Network Geolocation Location without using GPS, get approximate location based on mobile tower on RMS
INPUT/OUTPUT
-
Input 1 x Digital Input (Non-isolated, Logic low 0...+5V, Logic high +8...+40V)
-
Output 1 x Digital Output (open collector type, 30V@0.3A)
-
Events SMS, EMAIL, RMS
USB
-
Data rate USB 2.0
-
Applications Samba share, custom scripts
-
External devices Possibility to connect external HDD, flash drive, additional modem
POWER
-
Connector 4 pin industrial DC power socket
-
Input voltage range 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
-
PoE (passive) Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af and 802.3at standards
-
Power consumption 11W Max.
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
-
Ethernet 4 x RJ45 ports, 10/100/1000 Mbps
-
Status LEDs 3 x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 3x WAN status LEDs, 1x Power LED
-
SIM 2 x SIM slots (Mini SIM - 2FF), 1.8V/3V
-
Power 4 pin industrial DC power socket
-
Antennas 2 x SMA for LTE, 1 x SMA for GNNS
-
USB USB A socket for external devices
-
Reset Reset/restore to default button
PHYSICAL SPECIFICATION
-
Casing material Full aluminium housing
-
Dimensions 115 mm x 95 mm x 44 mm (H x W x D)
-
Weight 456g
-
Mounting options DIN rail (can be mounted on two sides), flat surface placement
OPERATING ENVIRONMENT
-
Operating temperature -40 C to 75 C
-
Operating humidity 10% to 90% non-condensing
-
Ingress Protection Rating IP30
RUTX09 0*****
Europe3, the Middle East, Africa, APAC2, Brasil
- 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28, B321
- 4G (LTE-TDD): B38, B40, B41
- 3G: B1, B3, B5, B8
PACKAGE CONTAINS
- Router RUTX09
- 18 W EU Power Supply
- 2 x LTE antennas (swivel, SMA male)
- 1 x GNSS antenna (adhesive, SMA male, 3 m cable)
- SIM Adapter kit
- Ethernet cable (1.5 m)
- QSG (Quick Start Guide)
- RMS Flyer
- Packaging box
1 - LTE-FDD B29 and B32 Support Rx Only, and in 2×CA it is Only for Secondary Component Carrier.
2 - Excluding Japan and CMCC.
3 - Regional availability - excluding Russia & Belarus.
Product safety information
Manufacturer information:
Teltonika Networks
K. Baršausko st. 66
Kaunas
Kaunas, Litauen, 51436
info@teltonika-networks.com
https://teltonika-networks.com
There are no reviews yet.
