TRB141 is a small Industrial LTE Cat 1 Gateway equipped with a wide variety of Inputs and Outputs and a MicroUSB port. This makes the Gateway perfect for applications where devices are managed remotely via I/O connectors.
Standart package contains
-
TRB141 Gateway
- Euro PSU
- 1 x LTE antenna (magnetic mount, SMA male, 3 m cable)
- Micro-USB cable (0.8 m)
- I/O connector
- QSG (Quick Start Guide)
- 1 x hex key
- TRB141 board in Alumium Housing
- QSG (Quick Start Guide)
- Packaging box
MOBILE
- Mobile module
4G (LTE) - Cat 1 up to 10 Mbps, 3G - Up to 42 Mbps, 2G - Up to 236.8 kbps
- Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received
- SMS/Call SMS status, SMS configuration, Call utilities
NETWORK
- Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL v3, TLS, SSH, DHCP, SNMP, MQTT
- Brige Direct connection (bridge) between mobile ISP and device on LAN
- Connection monitoring Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection, Wget
- Firewall Port forwards, traffic rules, custom rules
- DHCP Static and dynamic IP allocation
- DDNS Supported >25 service providers, others can be configured manually
SECURITY
- Authentication Pre-shared key, digital certificates, X.509 certificates
- Firewall Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
- Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
- OpenVPN Multiple clients and a server can run simultaneously, 12 encryption methods
- OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
- IPsec IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
- GRE GRE tunnel
- PPTP, L2TP Client/Server services can run simultaneously
MONITORING & MANAGEMENT
- WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log
- FOTA Firmware update from sever, automatic notification
- SSH SSH (v1, v2)
- SMS SMS status, SMS configuration
- MQTT MQTT Broker, MQTT publisher
- JSON-RPC Management API over HTTP/HTTPS
- Modbus Modbus TCP status/control
- RMS Teltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS
- CPU ARM Cortex-A7 1.2 GHz CPU
- RAM 128 MB (50 MB available for userspace)
- FLASH memory 512 MB (70 MB available for userspace)
FIRMWARE / CONFIGURATION
- WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
- FOTA Update FW/configuration from server
- RMS Update FW/configuration for multiple devices
- Keep settings Update FW without losing current configuration
FIRMWARE CUSTOMIZATION
- Operating system RutOS (OpenLinux based Linux OS)
- Supported languages Busybox shell, Lua, C, C++
- Development tools SDK package with build environment provided
INPUT/OUTPUT
- Input 2 x Digital inputs (configurable passive or active), 1 x Isolated input, 1 x Analog input (4-20 mA),
- Output 2 x Relay outputs (latching and non latching)
- Configurable I/O 2 x Configurable Digital Inputs/Outputs on 4 pin power connector
- 1-Wire 1
- Events SMS status
POWER
- Connector 4 pin industrial DC power socket
- Input voltage range 9 - 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10µ max
- Power consumption < 5 W
PHYSICAL INTERFACES (PORTS, LEDS, ANNTENAS, BUTTONS, SIM)
- USB Virtual network interface via USB
- I/Os 16 Inputs/Outputs pin connector, 2 Inputs/Outputs pin on 4 pin power connector
- Status LEDs 3 x connection type status LEDs, 5 x connection strength LEDs, 1x Power LED
- SIM 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
- Power 4 pin power connector with 2 x configurable Digital Inputs/Outputs
- Anntenas 1 x SMA for LTE
- Reset Restore factory settings button
PHYSICAL SPECIFICATIONS
- Casing material Aluminum housing
- Dimensions 60 mm x 70 mm x 18 mm (H x W x D)
- Weight 136 g
- Mounting options Bottom and sideways DIN rail, Flat surface and direct PCB on DIN-Rail mounting options
OPERATING ENVIRONMENT
- Operating temperature -40 °C to 75 °C
- Operating humidity 10 % to 90 % non-condensing
- Ingress Protection Rating IP30
REGULATORY & TYPE APPROVALS
- Regulatory CE/RED, EAC, RoHS, WEEE
EMI
- Standards Draft ETSI EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0 ()
- ESD EN 61000-4-2:2009
- RS EN 61000-4-3:2006 + A1:2008 + A2:2010
- EFT EN 61000-4-4:2012
- Surge protection EN 61000-4-5:2014
- CS EN 61000-4-6:2014
- DIP EN 61000-4-11:2004
RF
- Standards EN 300 511 V12.5.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-2 V11.1.2, ETSI EN 301 908-13 V11.1.2
SAFETY
- Standards IEC 62368-1:2014(Second Edition), EN 62368-1:2014+A11:2017
- EN 50385:2017
- EN 62232:2017
Product safety information
Manufacturer information:
Teltonika Networks
K. Baršausko st. 66
Kaunas
Kaunas, Litauen, 51436
info@teltonika-networks.com
https://teltonika-networks.com
There are no reviews yet.
