Diplexer for bridging non-channel-enabled products, such as cable amplifier / attenuation: 1 dB - blocking attenuation: 50dB
The diplexer / Bypass CLBP565 is used when components are not capable for return path in an object (passive return channel). Here, the frequency is divided into 2 areas.
Area 1: 5 - 65 MHz (back channel portion)
Area 2: 85 - 1000MHz (RF & TV area)
Thus, the return path band is z.Bsp. filtered prior to an amplifier and then merged again.
Attenuation: 1dB
Stop band attenuation: 50dB
Dimensions: 60 x 60 x 20mm
Particularities:
- Very small size
- Very low attenuation
TIP: for very simple installation using the coaxLAN Quick connection cable CL200QQ
Product safety information
Manufacturer information:
coaxLAN Technologie
Schlosserstraße 4
Baden-Württemberg
Köngen, Deutschland, 73257
info@coaxlan.de
https://www.coaxlan.de
Powerline data transmission via coaxial cable - Ethernet over Coax (EoC)
With the CoaxLAN system, you use your existing antenna cable, thus eliminating the need for expensive installation work (costs). The Internet is "put on" the antenna cable via its router and the coaxLAN master, and a coaxLAN modem is installed on the antenna sockets. Now you have a LAN or a LAN / WLAN signal available. The coaxLAN system works with 100Mbit net ports and with WLAN with the MIMO technology (up to 300Mbit).
This system is ideal for use at home or for hotels, pensions, clinics, etc. - up to 6 modems with the Homemaster CLM6 or up to 253 modems with the CLM253 master.
For the 500Mbit point to point transmission the Master 500 and the SLAVE 500 are used, which often comes with fiber optic connections.
Of course there are also products for internet monitoring, IP address management, speed limit, VLAN, several SSID's etc. at coaxLAN.
For more information, please request by email.
There are no reviews yet.
