coaxLAN CLAK200FF Connection cable in compression technology with F-p

Ideal for the CL64WLAN modem
In connection with an antenna socket return channel via the F-socket

The coaxLAN connection cables correspond to the highest quality level and are immune to interference. Interference is often caused in the last few centimeters to the end device because the connection cable saves money. Services on the same frequency can cause interference with connection cables that are not highly shielded, especially in the return channel.
You also don't save on tires in a car...do you?

Technical features of the connection cables

All connectors in compression technology

Class A
Shielding dimension: 120dB
Braid: copper tin plated
3-fold shielded 1.foil glued - braid 168 cores - 2.foil
Inner conductor: copper
Coverage: > 82% very high protection against interference signals
Attenuation arm approx. 2.9dB at 10m / 2150MHz
The dielectric is gas foamed, the increase in damping during the test period approx. 5%,
approx. 70% for chemically foamed cables
Gas foamed coaxial cables are mechanically more resilient

Note: The 1st foil must be glued, otherwise a coax cable loses its shielding property. This is because the coaxial cable laid around the corner can cause interference frequencies to affect the cable unhindered. By bending the cable, the foil overlap is pulled apart and the shielding property is lost. We recommend using high-quality coaxLAN connection cables with compression technology for all exposed coax cables. After all, the coax flush-mounted boxes and distribution modules, for example, are already shielded by default. Existing coax cables are usually embedded in the wall and shielded by the building structure.

SKU:	7007
GTIN:	4260509220903
Category:	Ethernet over Coax
Manufacturers:
Cable:	Compression Coaxial Cable
Lenght:	2m
Shipping weight:	0,20 kg
Item weight:	0,15 kg
Content:	2,00 m
SKU:	CLAK200FF