Sendtek Bundle (PES822/PES822N) 2 wire G.HN Phoneline Bridge with WLA

The PES822 is based on the new G.hn technology offering Gigabit Ethernet to phonelines bridge with a build-in wireless WiFi 802.11n access point.

The G.hn technology is the HPNA3 successor, contributing better performances and more features. It can be used with any kind of xDSL modem/router type.

Why do you need it?
The PES822 adapter provides very high speed networking solution, with stable and reliable performances for the entire home area. The adapter is tuned to fulfill users demands for streaming multimedia content to PCs, SmartTV sets, streamers, video games, , Pads, smart-phones, etc’.

The PES822 is built to interconnect between Fast Internet modems/routers and Ethernet compatible devices through the existing/installed home phonelines, allowing fast Internet to expand to far end locations, such as safety rooms, basements, multi-floor apartments, etc. The PES822N is a direct accompanying device to the PES822, offering Ethernet to Phoneline bridge with build-in WiFi Router.

Easy to Install
The PES822 is a real Plug & Play device with endless networking possibilities over existing cabling. It is easy to install and activate, thus avoiding needs for driver installation or support by networking technicians. It is perfect for most data applications requiring high-speed Internet connections over broad bandwidth networks.

Perfect for transferring large multimedia files (e.g. movies, music, and photos)
G.hn connection via an existing 2-wire telephone line (home networking in the house)
2x 100 / 1000Mbps Gigabit network connections for Internet connection via cable Modem, ADSL / VDSL, fiber optic connection and home networking, company networks (games console, computer, etc.)
Easy installation in multi-floor houses and in-house shelters/basements/safety-rooms.
Plug & Play solution - no need for special configuration set-up tools
Energy efficiency (green) Ethernet support Provides up to Gigabit/sec over phoneline, point-to-point and point-to-multipoint configurations
Built-in filter to eliminate noise from telephone or PSTN line
Signal quality indicator
Coexistence in ADSL / VDSL mixed mode (36-76MHz) on the same telephone line possible!
Communication range up to 300 meters over phoneline
Quality of Service (QoS) priority and mapping support
VLAN TAG configuration
IGMP Snooping Control
Based on the International Telecommunication Union (ITU) G.hn standard’s family
Superb reliability and compact size design
Status and statistics of the Ethernet interface
MIMO WiFi 802.11n (2Tx2R) at up to 300Mbps speed.

The Sendtek G.HN 2-wire Ethernet Bridge is compatible with ADSL / VDSL in the frequency range 36-96MHz, which makes it possible for the first time to extend a gigabit network over the existing telephone line in private homes or in residential buildings, hotels without the need for expensive new lines to draw.

Note: You always need 2 g.hn devices like 2x PES822 or 1x PES822 and 1x PES822N (WLAN AP), but 2x PES822N not work!

Network standard:
ITU G.9960 G.hn over Phoneline
IEEE 802.3u 100M Fast Ethernet
IEEE802.3ab 1000M Gigabit Ethernet
IEEE 802.3az Energy Efficiency Ethernet
MIMO WiFi IEEE 802.11n (2Tx2R) at up to 300Mbps speed.

Connections:
Ethernet: 2x RJ45 Ports
G.hn: 2x RJ11 ports, one for G.hn data transfer and the other for analogue telephone connection
MIMO WiFi 802.11n (2Tx2R) at up to 300Mbps speed

G.hn data transfer:
4 +/- 1 dBm @ 36 ~ 76 MHz
Maximum speed and distance
Up to 600Mbps ; up to 300 meters
AES 128 data encryption

Gigabit Ethernet interface:
100/1000Mbps Auto Negotiation
MDI/MDI-X Auto Crossover

WiFi Interface:
Antenna gain about 3.3 dBi
Supports all kind of WiFi security protocols
2.4GHz spectrum

Quality of Service:
Priority Mapping Based on IEEE 802.1p
Guaranteed G.hn Parameterized QoS

Management:
GUI, Web Browser
IPv4 und IPv6 Support
Queuing Scheme Based on 802.1p/TOS
Tag VLAN ID Tag/UnTag oder Pass Through
GMP Snooping Control
Statistik und Status

LED-Anzeige:
"Power" LED
G.hn "Link/Activity/Quality" LED
Ethernet "Link/Activity" LED x 2

Power:
12 Volt

Environmental Conditions:
Temperature operation: 0 ° C ~ 50 ° C (32 ° F ~ 122 ° F)
Temperature Storage: -20 ° C ~ 70 ° C (-4 ° F ~ 150 ° F)
Humidity: 10 to 90% (non-condensing)

Mass weight:
Width / depth / height: 130mm x 95mm x 32mm
Wall mounting Mounting bracket on rear of unit
Weight: 170g (without power supply)

ATTENTION: The g.hn 2wire version is designed for a point-to-point solution. It is NOT possible to establish multiple g.hn connections in one multiple cable. These pairs would interfere with each other. In electronics this is called overtalking. If you use multi-wire bundle systems, VOIPDISTRI also has VDSL2 vectoring technology in their portfolio.

Package Content:
1x PES822
1x PES822N with MIMO WiFi 802.11n Interface
2x EU Power Supply
2x RJ11-RJ11 Analog Telephone Cable
2x CAT5 network cable

SKU:	3730
Category:	G.HN HomeGrid
Manufacturers:
Shipping weight:	0,80 kg
Item weight:	0,40 kg
SKU:	PES822- PES822N

There are no reviews yet.

This item consists of

1x Sendtek PES822 G.hn Phoneline Gigabit Ethernet Bridge, HomeGrid ITU G.9960 G.hn via telephone line, 2-wire network connections, Coexistence in ADSL / VDSL mixed mode

Item currently out of stock

1x Sendtek PES822N Gigabit G.hn Phoneline Ethernet Bridge incl WLAN Accesspoint , HomeGrid ITU G.9960 G.hn via telephone line, 2-wire network connections, Coexistence in ADSL / VDSL mixed mod

Item currently out of stock

Sendtek Bundle (PES822/PES822N) 2 wire G.HN Phoneline Bridge with WLAN access point, HomeGrid ITU G.9960 G.hn via telephone line (coexistence with VDSL), 2 wire network connections

Please answer the question

Please answer the question