Industrial 10/100/1000Mbps 802.3at PoE+ Splitter, Output Voltage 5VDC, 20W/5VDC power output, standalone, Support DIN-Rail mounting and Wall mounting installation, -40 to 80°C operating temperature.
- Splits power and data from PoE Input
- 1* RJ-45 PoE Port (Data & Power In)
- 1* RJ-45 Port (Data Out)
- 1* 5 DC Output (2-pin Terminal Block)
- Support IEEE802.3af/at PoE
LNK-INS301 series is an Industrial Grade, Gigabit Ethernet, PoE Splitter, designed to deliver data, via RJ-45 Ethernet connector, and electrical power, via screw terminal block, to non-PoE devices. This device saves the high cost of running separate electrical service to edge devices.
The LNK-INS301 acts as PD equipment and can be powered by standard PoE IEEE802.3af/at PSE (Power Source Equipment) switches or work when paired with LNK-INJ301 PoE Injectors. The data transmission, up to Gigabit speeds, with power output voltages of 5/12/19/24/36VDC, run simultaneously up to the Ethernet limit of 100 meters. Simple settings of the LNK-INS301, make it a plug and play device, requiring no tools or software configuration, and provides ease of use, with flexible installation and high reliability.
Features
- Splits power and data from PoE Input
- 1* RJ45 PoE Port (Data & Power In)
- 1* RJ45 Port (Data Out)
- 1* 5V DC Output (2-pin Terminal Block)
- Support IEEE802.3af/at PoE
- Support 10/100/1000Base-T
- Distance up to 100 meters
- Short-circuit protection for power output
- IP40 rugged metal housing and fanless
- Support DIN-Rail & Wall-mount installation
- Extensive LED indicators for PoE diagnostics
- Wide operating temperature -40 ~ 80°C
Specifications
Ethernet
Standards:
- IEEE 802.3 10Base-T Ethernet
- IEEE 802.3u 100Base-TX Fast Ethernet
- IEEE 802.3ab 1000Base-T Gigabit Ethernet
- IEEE 802.3af Power over Ethernet
- IEEE 802.3at Power over Ethernet Plus
Processing Type:
- Forward
- Half-duplex, Full-duplex
Forward Filter Rate:
Cabling:
- 1000Base-T: Cat5 or above
Maximum Distance:
Interface:
- "PoE (Power + Data)" Input Port: 1 x RJ-45 10/100/1000Base-T
- "Data" Out Port: 1 x RJ-45 10/100/1000Base-T
- DC Out Plug Connector: 1 removable 2-Pin terminal block
Power over Ethernet
PoE Standard:
- IEEE 802.3af/at Power over Ethernet
Number of devices that can be powered:
- 1* (DC5V)
(Vary on device’s power requirement; cannot be over 20 watts.)
Environmental
Operating Temperature:
- -40°C to 80°C (-40°F to 176°F)
Storage Temperature:
- -40°C to 85°C (-40°F to 185°F)
Relative Humidity:
MTBF:
Electrical and Mechanical
Power Output:
- 20W 5V DC (Terminal Block)
Power Consumption:
LED Indicators:
- PWR: 5VDC Power OUT
- POE: PoE Power IN
Dimensions (WxDxH):
Weight:
Casing:
Mounting Options:
Regulatory Approvals
- ISO9001
- FCC part 15, Class A
- EN55022:2006+A1: 2007 Class A
Surge Protection:
- RJ45: 1KV
- Power: 500W
- ESD: 4KV/8KV
