- 4 x PoE ports with 802.3af and 802.3at support
- Rugged aluminium housing
- 5 x Gigabit Ethernet with speeds up to 1000 Mbps
- Compact size with DIN rail mounting option
- Plug-n-Play, no additional configuration needed
- Total power budget at PSE up to 120 W, 60 W with standard package PSU
TSW100 - 5-port, unmanaged full Gigabit Ethernet switch supporting Power-over-Ethernet (802.3af and 802.3at standards). This device is classified as power source equipment (PSE), and when used in this way, TSW100 switch enables centralization of the power supply, providing up to 30 watts of power per port and reducing the effort for installing power. It has 10/100/1000 Mbps Ethernet ports to provide an economical high-bandwidth solution for your industrial Ethernet network.
FEATURES
ETHERNET
- LAN 5 x LAN port, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
POE
- PoE ports Port 1- 4
- PoE standards 802.3af and 802.3at
- PoE Max Power per Port (at PSE) 30 W
- Total PoE Power Budget (at PSE) 120 W
- PERFORMANCE SPECIFICATIONS
- Bandwidth (Non-blocking) 10 Gbps
- Packet buffer 128 KB
- Jumbo frame support 9216 bytes
- MAC address table size 2K entries
POWER
- Connector 4 pin industrial DC power socket
- Input voltage range 7-58 VDC
- Power consumption (idle/max no PoE/max) 2 W/9 W/129 W
Note that TSW100 PoE ports works properly when switch is powered using PSU, which can supply 44 VDC or higher voltages. If TSW100 switch is powered with voltages ranging from 7 VDC to 43 VDC, it will work as standard switch, without PoE capabilities.
PHYSICAL INTERFACES (PORTS, LEDS)
- Ethernet 5 x RJ45 ports, 10/100/1000 Mbps
- Status LED’s 1 x Power LED, 10 x LAN status LED’s
- Power 1 x 4 pin DC connector
- Ground 1 x Grounding screw
PHYSICAL SPECIFICATION
- Casing material Full aluminum housing
- Dimensions (W x H x D) 115 x 32 x 95 mm
- Mounting DIN rail or wall mounting (additional kit needed), flat surface placement
OPERATING ENVIRONMENT
- Operating temperature -40 °C to +75 °C (-40 °F ~ 167 °F)
- Operating humidity 10 % to 90 % non condensing
STANDARD PACKAGE CONTAINS
- TSW100
- 65W Euro power supply
- QSG (Quick Start Guide)
- Packaging cardboard box
RECOMMENDATION
- The Teltonika TSW100 PoE Switch is suggested as accessories for the Teltonika OTD140, OTD500!
(Power over Ethernet: PoE Standard IEEE 802-3af and IEEE 802-3at)
Product safety information
Manufacturer information:
Teltonika Networks
K. Baršausko st. 66
Kaunas
Kaunas, Litauen, 51436
info@teltonika-networks.com
https://teltonika-networks.com
Quick Start Guide | Teltonika TSW100 Switch
Need some help setting up your new Teltonika TSW100 Switch? Watch our quick start guide video and follow the step by step instructions to easily set up your new gateway for operation.
Wondering where you can use Teltonika TSW100? Do not hesitate and open our Wiki page for more configuration examples and use cases: https://wiki.teltonika-networks.com/view/TSW100
There are no reviews yet.
