NV-2400H is a compact 24-ports VDSL2 IP DSLAM with 2 Gigabit Ethernet Combo interfaces and built-in POTS/ISDN splitter. It is compliant to ITU-T G.993.2 standard and supports VDSL2 30a profile that features 100 Mbps of symmetric data rate over the existing copper wires. NV-2400H is an ideal choice for ISPs and System Integrators that are looking for a high performance broadband solution for their triple play applications. It offers a user-friendly management interface that allows service providers to monitor and control their services in a highly secure and efficient way. With many powerful and advanced features, this Mini IP DSLAM is the perfect solution for deploying broadband access, IP Surveillance, Hospitality and MTU/MDU applications.
Traffic Flow QoS Ensuring for Application Services
The VDSL2 Switch contains robust QoS features such as port-based, 802.1p priority and IP TOS/DSCP. It guarantees the best performance of VoIP and video stream transmission and empowers the enterprises to take full advantage of the limited network resources.
IEEE 802.1q Q-in-Q VLAN for performance & security
The VLAN feature in the switch offers the benefits of both security and performance. VLAN is used to isolate traffic between different users and thus provides better security. Limiting the broadcast traffic to within the same VLAN broadcast domain also enhances performance. VLAN support enabling advanced techniques such as 802.1Q-in-1Q to be deployed. And support GVRP up to 4k V-Lan groups.
Selectable VDSL2 Data Rate for Service Differentiation
Through the management interface, the administrator can control the data rate of each VDSL2 port. Telecom and ISP can immediately and remotely upgrade/downgrade bandwidth service upon different demands.
Broadcast/Multicast/Unknown-unicast Storm Control
To limit too many broadcast/multicast/unknown-unicast flooding in the network, broadcast/multicast storm control is used to restrict excess traffic. Threshold values are available to control the rate limit for each port. Packets are discarded if the count exceeds the configured upper threshold.
Powerful Layer 2 Features
For efficient management, via Web interface, the NV-2400H can be programmed for basic switch management functions such as port speed configuration, port link aggregation, IEEE 802.1Q VLAN and Q-in-Q VLAN, port mirroring, Rapid Spanning Tree and ACL security. Additionally, the firmware includes advanced features such as IGMP snooping, QoS (Quality of Service), broadcast storm and bandwidth control to enhance bandwidth utilization.
Enhanced Security
The VDSL2 switch offers comprehensive Layer 2, Layer 3 and Layer 4 Access Control List (ACL) to filter out unwanted traffic. Its protection mechanisms comprise 802.1X RADIUS user and device authentication. Moreover, the VDSL2 switch provides MAC filter, Static MAC, and Port Security for enforcing security policies to the edge. Administrators can now build highly secure corporate networks have considerably less time and effort than before.
Features
• Support 8a, 8b, 8c, 8d, 12a, 12b, 17a and 30a full band profiles.
• Support 997 and 998 band plans.
• Supports Jumbo packet up to 9k byte.
• Supports interleave delay for noise resistant and data loss.
• Supports traffic storm control.
• Support port mirroring (sniffer) and broadcast storm filtering.
• Support L2/L3/4 access control list(ACL).
• Supports port security with MAC address filtering.
• Supports high bandwidth up to 100Mbps within 0.3km (984 feet) for VDSL2 ports.
• Supports web based for remote management.
• Support In-Band/Out-of-Band management.
• Support HTTP/TFTP for firmware upgrade.
• Supports HTTPS (SSL) web management.
• Supports bandwidth management(rate control) from 128k to 100Mbps.
• Supports IEEE 802.1q tagging VLAN with Q-in-Q.
• Supports TOS to IEEE-802.1p with 4 priority queues with DSCP.
• Supports Multicast IP table/IGMP v2 with 512 groups.
• Support IEEE 802.1d STP / IEEE 802.1w RSTP & IEEE-802.1s MSTP.
• Support SNMP v1/v2/v3 RFC-1493 bridge MIBs, RFC-1643 Ethernet MIB, RFC-1213 MIBII.
• Support RMON groups 1(Statistics), 2(Alarm), 3(Event), 9(History).
• Support DHCP client and Relay & Option 82.
• Supports LLDP (Link Layer Discovery Protocol) protocol.
• Supports remote syslog.
• Supports quality of phone wiring detected with SNR(Signal to Noise Ratio) indicators.
• Supports surge protection and splitter on board.
* Specifications are subject to change without prior notice.
Standard Conformance |
Standard: | IEEE802.3/802.3u/802.3ab/802.3z standards
ITU-T G993.2, G993.1,G994.1, G997.1 standards |
Regulatory Compliance: | FCC Class B
CE VCCI EN60950 RoHS compliance |
Hardware Specifications |
Physical Interface: | 2 x RJ-45 Gigabit TP / SFP combo port
1 x RJ-21 connector for 24 x VDSL2 ports connection
1 x RJ-21 connector for 24 x POTS ports connection
1 x console port(RJ-45/115200bps) 1 x RJ-45 Alarm Port for 4 Alarm Inputs |
LED indication: | 1 x Power LED 1 x POST LED 1 x RUN/ALARM LED
2 x Link/Active, Speed(1000/100) Status for Gigabit ports
24 x VDSL Link/Sync. for VDSL2 ports |
Electrical: | Power: 100-240 V ac, 50-60 Hz.
Power Consumption: 90Watts maximum |
Operating Temperature: | -10°C~ 50°C (14°F ~ 122°F) |
Storage Temperature: | -40°C ~ 70°C (-40°F ~ 158°F) |
Humidity: | 5 to 95% (non-condensing) |
Dimensions: | 435mm x 260mm x 67mm (17.12" x 10.24" x 2.63") |
L2 Functions |
Protocol Support: | IGMP Snooping/Proxy v1, v2 and v3
Multicast Forwarding with IGMP Snooping v1 and v2 (RFC 1112 and RFC 2236)
Multicast MAC address mapping
Up to 512 Multicast Channels
Profile-based Access Control (up to 24 profiles)
Fast and Normal Leave Modes |
Security: | L2 Frame Filtering by MAC Addresses
L3 Frame Filtering by IP Addresses, protocol ID, and TCP/UDP
DHCP and ARP Broadcasting Frames Filtering
Support Secured Forwarding |
Management: | Local Management: RS-232 and Telnet CLI, Web/SNMP management.
Remote in-band Management: Web/SNMP/Telnet
Support SNMP v1/v2/v3 |
* Specifications are subject to change without prior notice.
Download
FAQ-
What is NV-2400H related products?
Netsys NV-2400H can fully compatible with NV-202, NV-202P.
-
Is that possible to use ADSL2+ modems with the VDSL2 IP DSLAM?
Please Note that it is not possible to use ADSL2+ modems with VDSL2 IP DSLAM, since ADSL2+ is based an ATM frame and Netsys VDSL2 IP DSLAM is based on EFM frame. Two frames are not compatible
-
What is an acceptable SNR for VDSL2?
Higher SNR numbers represent cleaner signals with less noise. In some instances interleaving can help raise the noise margin to an acceptable level. < 6dB: An SNR of less than 6 dB usually will result in line issues. 7dB - 10dB: This is a decent SNR but doesn't leave much room for variances in line conditions. 11dB - 20dB: Most people who live within a short amount of distance from the VRAD (less than 1500 feet) will have an SNR within that range. This will result in little to no sync problems. 20dB - 28dB: Outstanding SNR, you must have the VRAD as your next door neighbor.
