The Sirrix.PCI1E1 Card introduces many important highlights like the onboard DSP-based echo cancellation module with conference bridge. The Sirrix.PCI2E1 card provides one E1 port with 30 B-channels. Some features of Sirrix interface cards:
- PCI-Card
- 1 PRI port
- Ports are independently configurable in NT (clock master) and TE (clock slave) mode
- Programmable gate array on board (FPGA)
- Encryption with zero-delay (optional)
- Hardware echo cancellation with conference bridge
- Integrated Sirrix PCM bus
- Channel-driver for Asterisk PBX software
Hardware
- PCI V2.1 Card
- 174 mm x 106 mm
- incl. PCI connector + bracket
- One E1 ports (PRI S2M), 1 x RJ45
- Programmable gate array
(FPGA Altera Cyclone II)
- 2 LEDs (DS1 and DS2) for display of FPGA and card status
- 256 KByte SRAM as B-channel buffer for software switching with a depth of 64 Byte.
- Sirrix.PCM bus for B-channel switching in hardware across multiple cards (bandwidth 65,536 MBit = 1024-channels)
- Octasic DSP echo cancellation module with conference bridge
- Retrievable serial number
- Transparent encryption with low delay of B-channels with an arbitrary block cipher in the operation modes OFB, CFB, CTR or with another arbitrary stream cipher
ISDN-Hardware
- E1 port (PRI S2M)
- Infineon PEF2256H FALC56 V2.2
- The E1 port is configurable in NT (clock master) or TE (clock slave) mode independently
- One LED for E1 port for display of the Layer 1 activation state
ISDN-Stack
- Comprehensive implementation of the DSS1 ISDN stack
- Layer 1: Hardware with kernel module
(ITU-T I.431 / ETSI EN 300 011-1)
- Layer 2 and 3: in user space
(ITU-T Q.920, Q.921, Q.930, Q.931, Q.932, Q. 850 / ETSI EN 300 012, ETS 300 125, ETS 300 102, EN 300 196)
- NT and TE mode in PtP and PtMP configuration
- Arbitrary number of Layer 2 und 3 instances
- ISDN numbers with arbitrary length, with or without direct dialling in (MSN + DDI, ITU-T Q.951.1, Q.951.2, ETSI EN 300 064-1, EN 300 052-1)
- Display of calling party number (CLIP)
(ITU-T Q.951.3, ETSI EN 300 092-1)
- CallerID name can be transmitted by Display Information Element
- Suppression of display of calling party number (CLIR), from telephone menu
(ITU-T Q.951.4, ETSI EN 300 093-1)
- Connected Party Number (COLP)
(ITU-T Q.951.5, ETSI EN 300 097-1)
- Call forward (CFU, CFNR, CFB, facility protocol), from telephone menu
(ITU-T Q.952, ETSI EN 300 207-1)
- Hold and call selection (HOLD)
(ITU-T Q.953.2, ETSI EN 300 196-1)
- Call transfer (ECT)
(ITU-T Q.952.7, ETSI EN 300 369-1)
- CallWaiting (CW)
(ITU-T Q.953.1, ETSI EN 300 058-1)
- Three party conference (3PTY) from telephone menu
(ITU-T Q.954.2, ETSI EN 300 188-1)
- Advice of charge (AOCD) in units or currency
(ITU-T Q.956.2, ETSI EN 300 188-1)
- Notify Information Element e. g. during HOLD or 3PTY
- Redirection Party Number Information Element
- Q.SIG supplementary services: Display of calling and connected party names (CNIP and CONP)
Applications
- Software based PBX systems
- Channel banks and TDMoverIP
- ISDN crypto gateways
- VoIP gateway to the public telephone network or VoIP Gateway for internal extensions
- Least Cost Router for VoIP or CbC
- TETRA Gateways
Scalability
- By interlinking multiple systems, a virtually arbitrary amount of extensions can be served.
- Sirrix.PCM-Bus supports up to 8 ISDN-cards per system with automatic system-wide clock synchronisation
- The connection to the public net can be achieved by an arbitrary number of BRI- or PRI-ports.
System Requirements
- Arbitrary computer system
- Free 32 Bit PCI 2.1 slot
- Linux with kernel 2.6
Hardware specification, more information here: PCI2E1-Karte
| Bus standard: |
PCI |
| Gateway & Interface Features: |
ISDN PRI E1/T1(J1) |
| Item weight: |
1,00 kg
|
|
PN:
|
SRX-PCI1E1-HW
|
Product safety information
Manufacturer information:
Rohde & Schwarz GmbH & Co. KG
Muehldorfstrasse 15
Bayern
Munich, Deutschland, 81671
info@rohde-schwarz.com
https://www.sirrix.de
There are no reviews yet.
