LTE Cat6 Router with transfer speeds up to 300 Mbps, Gigabit Ethernet, WLAN 802.11ac with transfer speeds up to 867 MBit/s, Bluetooth v4.2 LE
First I will explain what is Load balancing and WAN failover.
Load balancing lets users create rules that divide traffic between different interfaces.
Backup WAN or WAN Failover is a function that allows you to back up your primary connection in case it goes down.
In your case, I recommend using WAN Failover. In the RUTX11 router settings, you can set the internet that comes with cable to be the main WAN and the mobile LTE internet as the WAN failover. When you lose the internet access through the cable (WAN port), the WAN failover is instantly activated and the device uses the Internet over LTE.
The RUTX11 routers have one modem, so only one SIM card can work at a time. If you want two LTE networks, then as you mentioned, you need two routers. The data flow of both routers can be combined using Load Balancing. More information about Load Balancing:
https://wiki.teltonika.lt/view/Load_Balancing
Package Content
- Teltonika RUTX11 EU Version
- Euro PSU
- 2 x LTE antennas (swivel, SMA male)
- 1 x WiFi antennas (swivel, RP-SMA male)
(Instead of two we deliver only one, this one is missing and can be reordered separately)
- 1 x GNSS antenna (adhesive, SMA Male)
- 1 x Bluetooth antenna (magnetic, RP-SMA male)
- Ethernet cable
- QSG (Quick Start Guide) - Copy
- Packaging box
Hardware specs
- LTE Cat6 with speeds up to 300 Mbps
- Dual Band 2.4 GHz and 5 GHz WiFi channels
- 802.11ac WiFi with speeds up to 867 Mbps
- 802.11n WiFi with speeds up to 300 Mbps
- 4 x 1Gbit Ethernet ports
- Quad Core ARM Cortex A7 717 MHz CPU
- 256 MBytes Flash
- 256 MBytes DDR3 RAM
- Blue-tooth v4.2 LE
- Low power/sleep mode, 10 mA @ 12 VDC
- 4 pin DC connector with 1 x digital input (ignition detection) and 1x digital output
- Grounding option
- 5 x Signal strength LEDs,
3 x connection type indication LEDs,
2 x WiFi band activity LEDs,
1 x Power LED,
4 x WAN connection indicator LEDs.
- 2 x WiFi RP-SMA connectors
- 2 x LTE SMA connectors
- 1 x Blue-tooth RP-SMA connector
- 1 x 2.0 USB
- 2 x external SIM holders
- 1 x SIM holder removal pin
Electrical, Mechanical & Environ mental specs
- Input voltage: 9 - 50 VDC
- Operating temperature: -40 °C to 75 °C (-40°F ~ 167°F)
- Storage temperature: -45 °C to 80 °C
- Operating humidity: 10 % to 90 % non-condensing
- Storage humidity: 5 % to 95 % non-condensing
- Dimensions: 115 mm x 95 mm x 44 mm
- Weight: TBD
* All product specifications are subject to change without notice.
REGULATORY & TYPE APPROVALS
- Regulatory: CE/RED, RoHS, REACH
- Vehicle: ECE R10 (E-mark)
EMI IMMUNITY
- Standards: EN 55032:2015, EN 55035:2017, Draft ETSI EN 301 489-1 V2.2.1, ETSI EN 301 489-3 V2.1.1, Draft ETSI EN 301 489-17 V3.2.0
- ESD: EN 61000-4-2:2009
- RS: EN 61000-4-3:2006 + A1:2008 + A2:2010
- EFT: EN 61000-4-4:2012
- Surge protection: EN 61000-4-5:2014
- CS: EN 61000-4-6:2014
- DIP: EN 61000-4-11:2004
RUTX11 is now certified to EN 45545-2 and thus
officially approved as safe for use in passenger trains throughout Europe.
The Teltonika RUTX11 industrial mobile router has been certified according to the European standard EN 45545-2. This standard is the technical specification for fire protection of rail vehicles in Europe and defines the safety requirements that equipment for passenger trains in Europe must meet.
RF
- Standards: ETSI EN 300 328 V2.1.1, ETSI EN 301 893 V2.1.1, ETSI EN 300 440 V2.1.1
SAFETY
- Standards: IEC 62368-1:2014 (Second Edition) EN 62368-1:2014+A11:2017 EN 50385:2017 EN 62232:2017
Cellular Specifications
LTE
LTE Cat6 up to 300Mbps Download
LTE Cat6 up to 50Mbps Upload
UMTS/DC-HSPA+
3G DC-HSPA+ up to 42Mbps Download
3G HSUPA up to 5.76Mbps Upload
Supported Bands
RUTX11 0***** Europe, the Middle East, Africa, Australia, APAC2, Brasil, Malaysia
- LTE-FDD: B1/B3/B5/B7/B8/B20/B28/B321
- LTE-TDD: B38/B40/B41
- 3G: B1/B3/B5/B8
1 - LTE-FDD B29 and B32 Support Rx Only, and in 2×CA it is Only for Secondary Component Carrier.
2 - Excluding Japan and CMCC.
