coaxLAN CLAK100FWS Connection cable in compression technology with F-plug straight/coax angle plug, shielding dimension: 120dB / class A - length 1.0m

coaxLAN CLAK100FWS Connection cable in compression technology with F-plug straight/coax angle plug, shielding dimension: 120dB / class A - length 1.0m

In stock

coaxLAN CLAK100FWS in conjunction with an RK antenna socket via the F socket

SKU	2874
GTIN	4260509220996
Category	Ethernet over Coax
Manufacturers

10,71 € (Net 9,00 €)

incl. 19% VAT , plus

Available immediately
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Ideal for the Home Master CLM6, CLM6i as interference-free connection cable with F-connector
In conjunction with a CL502, CL602 antenna socket return channel via the right IEC coaxial socket (female)

The coaxLAN connection cables correspond to the highest quality level and are immune to interference radiation. Interference is often caused in the last few centimeters to the end device because the connection cable saves money. Services on the same frequency can cause interference with connection cables that are not highly shielded, especially in the return channel.
You also don't save on tires in a car...do you?

Technical features of the connection cables

All connectors in compression technology
Class A
Shielding dimension: 120dB
Braid: copper tin plated
3-fold shielded 1.foil glued - braid 168 cores - 2.foil
Inner conductor: copper
Coverage: > 82% very high protection against interference signals
Attenuation arm approx. 2.9dB at 10m / 2150MHz
The dielectric is gas foamed, the increase in damping during the test period approx. 5%,
approx. 70% for chemically foamed cables
Gas foamed coaxial cables are mechanically more resilient

Note:
The 1st foil must be glued, otherwise a coax cable loses its shielding property. This is because the coaxial cable laid around the corner can cause interference frequencies to affect the cable unhindered. By bending the cable, the foil overlap is pulled apart and the shielding property is lost. We recommend using high-quality coaxLAN connection cables with compression technology for all exposed coax cables. After all, the coax flush-mounted boxes and distribution modules, for example, are already shielded by default. Existing coax cables are usually embedded in the wall and shielded by the building structure.

Cable:	Compression Coaxial Cable
Lenght:	1m
Shipping weight:	0,10 kg
Item weight:	0,05 kg
PN:	CLAK100FWS

Product safety information

Manufacturer information:

coaxLAN Technologie
Schlosserstraße 4
Baden-Württemberg
Köngen, Deutschland, 73257
info@coaxlan.de
https://www.coaxlan.de

Powerline data transmission via coaxial cable - Ethernet over Coax (EoC)

With the CoaxLAN system, you use your existing antenna cable, thus eliminating the need for expensive installation work (costs). The Internet is "put on" the antenna cable via its router and the coaxLAN master, and a coaxLAN modem is installed on the antenna sockets. Now you have a LAN or a LAN / WLAN signal available. The coaxLAN system works with 100Mbit net ports and with WLAN with the MIMO technology (up to 300Mbit).
This system is ideal for use at home or for hotels, pensions, clinics, etc. - up to 6 modems with the Homemaster CLM6 or up to 253 modems with the CLM253 master.
For the 500Mbit point to point transmission the Master 500 and the SLAVE 500 are used, which often comes with fiber optic connections.
Of course there are also products for internet monitoring, IP address management, speed limit, VLAN, several SSID's etc. at coaxLAN.
For more information, please request by email.

Other items by coaxLAN Technologie

There are no reviews yet.